User manual SAMSUNG PL50C6500

[. . . ] Connect Audio Cables(Not supplied) between the DVI IN (HDMI 2) [R-AUDIO-L] jack on the TV and the Cable When using an HDMI/DVI cable(Not supplied) connection, you must use the HDMI IN2 jack. 1 CONNECTING A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) VIA COMPONENT CABLES 1 2 Audio Cable (Not supplied) Component Cable (Not supplied) 1. Connect a Component Cable(Not supplied) between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box). AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box). 2. [. . . ] Press the or button to select Channel, then press the ENTER button. Press the or button to select Auto Program, then press the ENTER button. The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the EXIT button to exit. TV Channel Antenna : Air Auto Program Channel Manager Fine Tune Color System : Auto Move Enter Return · All available analog channels are automatically stored in memory. · It takes approximately 3 to 10 minutes to memorize channels. 2 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Poor picture quality. No picture or sound. No sound or sound is too low at maximum volume. On your equipment check (STB, DVD, etc) ; Power and Signal Cable. The TV is using its power management system. Press the Source button on the panel or remote control. Although the TV caption shows HD, The HD(High Definition) caption that appears when switching channels or when pressing the visual quality is not satisfactory. the INFO button on the remote control means the selected channel is a digital channel. If the broadcasting station converts an analog signal into digital and transmits the signal, the visual quality may not be perfect. A distorted picture appears in the If Just Scan is selected in some external devices, a distorted picture appears in the corner corner of the screen. picture may appear in the corner of the screen. [. . . ] This symptom is caused by external devices, not the TV. This is caused by minor systems operation and is not a defect. The "Resets all settings to the default This appears when you press and hold the EXIT button for a while. [. . . ]