User manual SAMSUNG PL58A550

[. . . ] When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack. CONNECTING A DVD PLAYER OR CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) VIA COMPONENT CABLES 1 Audio Cable (Not supplied) Component Cable (Not supplied) 2 1. Connect Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box / Satellite receiver(Set-Top Box). jacks on the DVD Player or Cable Box / Satellite receiver (Set-Top Box). 2. Connect Audio Cables between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT Component video separates the video into Y (Luminance (brightness)), PB (Blue) and PR (Red) for enhanced video quality. [. . . ] For example, if connecting the video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also. Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration. When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable. 1. . Storing Channels Automatically Channel 4. 5. Press the MENU button to display the menu. Press the or button to select Channel, then press the ENTER button. Antenna : Air Press the or button to select Auto Program, then press the ENTER button. Auto Program Press the or button to select an antenna connection, then press the ENTER button. Clear Scrambled Channel Fine Tune Cable: Cable antenna signal. Signal Strength Auto: Air and Cable antenna signals. When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the , , or to select the correct analog signal cable system source among STD, HRC, and IRC, then press the ENTER button. Then, adjust the TV volume accordingly. Poor sound quality. No picture or sound. No sound or sound is too low at maximum volume. Remote control malfunctions Digital broadcasting screen problem. The image is too large or too small. The visual qualities of digital channels · The visual qualities of digital channels may vary depending on the original production vary. - If the original production method is digital: High visual quality. - If the original production method is analog: The digital program displayed on the screen is originally an analog program which has been converted to digital. · The visual quality is of an SD(Standard Definition) grade. Screen is black and power indicator light blinks steadily. · On your computer; check the Power and Signal Cable. · The TV is using its power management system. · Move the computer's mouse or press any key on the keyboard. · On your equipment check (STB, DVD, etc) ; Power and Signal Cable. [. . . ] · The TV is using its power management system. · Press the Source button on the panel or remote control. · Turn the TV off and on. Although the TV caption shows HD, the visual quality is not satisfactory. · The HD(High Definition) caption that appears when switching channels or when pressing the Information button on the remote control means the selected channel is a digital channel. If the broadcasting station converts an analog signal into digital and transmits the signal, the visual quality may not be perfect. [. . . ]