User manual SAMSUNG PL63A750

[. . . ] Connect a Component Cable(Not supplied) between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box). AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box). 2. Connect Audio Cables(Not supplied) between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the Storing Channels in Memory (Automatic Method) 1 2 Press the MENU button to display the menu. Press the or button to select Channel, then press the ENTER button. [. . . ] Press the or button to select Channel, then press the ENTER button. Press the or button to select Auto Program, then press the ENTER button. Press the or button to select an antenna connection, then press the ENTER button. Antenna Channel : Air Auto Program Clear Scrambled Channel Channel List Fine Tune Signal Strength 4 Air: Air antenna signal. Auto: Air and Cable antenna signals. When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the or to select the correct analog signal cable system source among STD, HRC, and IRC, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital. 5 STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. The TV begins memorizing all available stations. After all the available channels are stored, the TV starts to remove scrambled channels (see page 47). If you want to stop Auto Programming, press the ENTER button. On your equipment check (STB, DVD, etc) ; Power and Signal Cable. The TV is using its power management system. Press the Source button on the panel or remote control. Although the TV caption shows HD, The HD(High Definition) caption that appears when switching channels or when pressing the visual quality is not satisfactory. the INFO button on the remote control means the selected channel is a digital channel. If the broadcasting station converts an analog signal into digital and transmits the signal, the visual quality may not be perfect. The distorted picture appears in the If Just Scan is selected in some external devices, a distorted picture appears in the corner corner of the screen. picture may appear in the corner of the screen. This symptom is caused by external devices, not the TV. This is caused by minor systems operation and is not a defect. [. . . ] picture may appear in the corner of the screen. This symptom is caused by external devices, not the TV. This is caused by minor systems operation and is not a defect. There may be few bright or dark pixels on the screen. [. . . ]