User manual SAMSUNG PL63C7000YM

[. . . ] Connect Audio Cables(Not supplied) between the DVI IN (HDMI 2) [R-AUDIO-L] jack on the TV and the Cable When using an HDMI/DVI cable(Not supplied) connection, you must use the HDMI IN2 jack. 1 CONNECTING A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) VIA COMPONENT CABLES 1 2 Audio Cable (Not supplied) Component Cable (Not supplied) 1. Connect a Component Cable(Not supplied) between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box). AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box). 2. [. . . ] Press the or button to select Channel, then press the ENTER button. Press the or button to select Auto Program, then press the ENTER button. Press the or button to select an antenna connection, then press the ENTER button. Antenna Channel : Air Auto Program Full Guide Mini Guide Default Guide Channel List Fine Tune Signal Strength LNA : On : Mini Guide 4 Air: Air antenna signal. Air + Cable: Air and Cable antenna signals. If the antenna is connected to ANT 2 IN (CABLE), select Cable and if it is connected to ANT 1 IN (AIR), select Air. If both ANT 1 IN and ANT 2 IN are connected, select the Air + Cable. The TV begins memorizing all available stations. 5 When pressing the ENTER button during a storing process, the message Would you like to stop the auto channel selection?Select Yes by pressing the or button. After all the available channels are stored, the Auto Program menu reappears. Press the EXIT button to exit. 2 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Poor picture quality. The TV is using its power management system. Press the Source button on the panel or remote control. Although the TV caption shows HD, The HD(High Definition) caption that appears when switching channels or when pressing the visual quality is not satisfactory. the INFO button on the remote control means the selected channel is a digital channel. If the broadcasting station converts an analog signal into digital and transmits the signal, the visual quality may not be perfect. The distorted picture appears in the If Just Scan is selected in some external devices, a distorted picture appears in the corner corner of the screen. picture may appear in the corner of the screen. This symptom is caused by external devices, not the TV. This is caused by minor systems operation and is not a defect. [. . . ] This is caused by minor systems operation and is not a defect. There may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. [. . . ]