User manual SAMSUNG PL80

[. . . ] Instructions Use this camera in the following order. Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p. 20) Getting to Know your camera Thank you for buying a Samsung Digital Camera. [. . . ] [Zoom Mute] : Record a video without sound while zooming. Zoom Mute Back Move 50 Smart mode Smart mode Smart mode allows users to take a photo simply, without setting any of the more complex functions available. Even beginners can easily learn how to operate it. Smart mode display The LCD monitor displays information about the current Smart mode setting. [Smart Auto mode] [Smart Movie Clip mode] You can use the Smart button at the top of the camera to start Smart mode. [Image & Full Status] 51 Smart mode display No. 1 Description Recording mode Number of available shots remaining Remaining time 3 4 5 6 7 8 9 10 11 12 Memory card icon / Internal memory icon Battery Photo Size / Movie Size Frame rate Flash Self-timer Date / Time Optical Zoom bar Auto Focus Frame OIS [Frame Rate] is enabled only in [Smart Movie] mode. 2010/01/01 01:00 PM 00001 00:00:00 p. 15 p. 39 p. 39 p. 34 p. 35 p. 58 p. 29 p. 44 p. 48 Icons Page p. 51 Starting Smart mode Selecting modes Mode selection using the Smart button You can use the Smart button at the top of your camera to select the correct smart mode. 2 p. 17 [Program mode] [Smart Auto mode] [Movie Clip mode] [Smart Movie Clip mode] 52 Starting Smart mode How to use Smart Auto mode ( ) How to use Smart Movie Clip mode ( ) The camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes. Select Smart Auto mode by pressing the MODE or Smart button 2. The camera selects a scene automatically. An appropriate mode icon will appear at the top left of the screen. Press the Shutter button to capture an image. This mode allows users to record a movie clip simply, without setting any of the more complex functions available. Use the Smart button to select Smart Movie Clip mode. Point the camera towards the subject and compose the image by using the LCD monitor. Press the shutter button once and movie clips are recorded for as long as the available recording time allows. Movie clips will still be recorded if the shutter button is released. If you wish to stop recording, press the shutter button again. Each scene is recognized in the following conditions; [Landscape] [Sunset Sky] [Blue Sky] [Natural Green] ( ( ( ( ) : When shooting outdoor scenes ) : When shooting sunset ) : When shooting blue sky ) : When shooting nature such as forest and leaves 53 Sound menu In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by * are default settings. Menus are subject to change without prior notice. Shutter sound You can select the shutter sound. - Shutter sound : [Off], [1]*, [2], [3] Volume Start Sound Shutter Sound Beep Sound AF Sound :Medium :Off Off :1 1 2 3 :1 :On Sound ( ) Volume You can select a volume of start up sound, shutter sound, beep sound and AF sound. - [Volume] sub menus : [Off], [Low], [Medium]*, [High] Volume Start Sound Shutter Sound Beep Sound AF Sound Off :Medium Low :Off Medium :1 High :1 :On Back Set Beep sound If you set sound to ON, a beep will sound when buttons are pressed, letting you know the camera operation status. - [Beep Sound] sub menus : [Off], [1]*, [2], [3] Volume Start Sound :Medium :Off Off :1 1 2 3 :1 :On Back Set Start up sound You can select the sound that is activated whenever the camera is turned on. - Start up sound : [Off]*, [1], [2], [3] Volume Start Sound Shutter Sound Beep Sound AF Sound :Medium Off :Off 1 2 3 :1 :1 :On Shutter Sound Beep Sound AF Sound Back Set Back Set 54 Sound ( ) AF sound If you set AF sound to on, AF sound will be activated when the Shutter button is pressed down half way so that you can be aware of the camera operation status. [. . . ] Restart the PC and connect the camera again. In some security programs (Norton Anti Virus, V3, etc. ), the computer may not recognize the camera as a removable disk. Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program. [. . . ]