User manual SAMSUNG PN42C430

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site Address CANADA 1-800-SAMSUNG(726-7864) www. samsung. com/ca Samsung Electronics Canada Inc. , Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Samsung Electronique Canada Inc. , Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada U. S. A 1-800-SAMSUNG(726-7864) www. samsung. com/us Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 Plasma TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Model _____________ Serial No. [. . . ] If GameMode is On: Picture mode is set to Standard and Sound mode is set to Movie. Selecting Reset after adjusting the equalizer returns the equalizer to its default settings. x x x x x x x x x DigitalCaptionOptions are available only when Default and Service1~Service6 can be selected in Caption Mode. The availability of captions depends on the program being broadcasted. The Default setting follows the standards set by the broadcaster. The Foreground and Background cannot be set to have the same color. You cannot set both the ForegroundOpacity and the BackgroundOpacity to Transparent. Caption (On-Screen Text Messages) Caption(Off/On): You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. CC The Caption feature doesn't work in Component, HDMI modes. 20 English Melody(Off/Low/Medium/High) Set so that a melody plays when the TV is turned on or off. The Melody does not play. x x x When no sound is output from the TV because the MUTE button has been pressed. When no sound is output from the TV because the volume has been reduced to minimum with the VOL ­ button. When the TV is turned off by SleepTimer function. If you hear no sound from the TV's speakers, before performing the sound test, make sure SpeakerSelect is set to TVSpeaker in the Sound menu. The melody will be heard during the test even if SpeakerSelect is set to ExternalSpeaker or the sound is muted by pressing the MUTE button. 03 BasicFeatures ¦ EconomicalSolutions O MENUm Setup ENTERE Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. Contact Samsung's Call Center for assistance (1-800-SAMSUNG). No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. If the problem persists, refer to the external device's user manual. SignalStrength: (Digital channels only) An HD channel's reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. EnergySaving(Off/Low/Medium/ High) This adjusts the brightness of the TV in order to reduce power consumption. Until the screen turns on again, a distorted picture will be displayed for about 4 seconds. SoftwareUpgrade Samsung may offer upgrades for your TV's fi rmware in the future. com or contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port. TV Side Panel EcoSensor(Off/On) Eco Sensor detects surrounding light intensity using an optical sensor and adjusts the screen's brightness. EcoSensor(Off/On): Turns the sensor off or on. If you adjust the Backlight, the Eco Sensor will be set to Off. USB Drive MinCellLight: Manually adjust the screen brightness (0~10). If EcoSensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. Support Menu We recommend you write down your settings so that you can easily reset them after the upgrade. O MENUm Support ENTERE HDConnectionGuide Refer to this information when connecting external devices to the TV. SelfDiagnosis PictureTest(Yes/No): Use to check for picture problems. Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. [. . . ] If the TV is in the StoreDemo mode, it will reset audio and picture settings every 30 minutes. Change the settings from StoreDemo mode to HomeUse mode in the Plug&Play procedure. Press the SOURCEbutton to select TV mode, and go to MENU Setup Plug&Play ENTERE (p. Check the cable connections and reconnect them. [. . . ]