User manual SAMSUNG PN42C430A1D

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country CANADA Customer Care Center 1-800-SAMSUNG (726-7864) Web Site www. samsung. com Address Samsung Electronics Canada Inc. , Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 U. S. A 1-800-SAMSUNG (726-7864) www. samsung. com Plasma TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Model _____________ Serial No. [. . . ] - Equalizer is not available. x x x x x x x x Digital Caption Options are available only when Default and Service1 ~ Service6 can be selected in Caption Mode. The availability of captions depends on the program being broadcasted. The Default setting follows the standards set by the broadcaster. The Foreground and Background cannot be set to have the same color. You cannot set both the Foreground Opacity and the Background Opacity to Transparent. Caption (On-Screen Text Messages) Caption (Off / On): You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. CC The Caption feature doesn't work in Component, HDMI modes. 20 English Melody (Off / Low / Medium / High) Set so that a melody plays when the TV is turned on or off. Sound Test (Yes / No): Use the built-in melody sound to check for sound problems. 03 Basic Features The Melody does not play. x x x When no sound is output from the TV because the MUTE button has been pressed. When no sound is output from the TV because the volume has been reduced to minimum with the VOL ­ button. When the TV is turned off by Sleep Timer function. If you hear no sound from the TV's speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu. The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button. ¦ Economical Solutions O MENUm Setup ENTERE The Eco Function can be used to enhance your power savings. Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. Contact Samsung's Call Center for assistance (1-800-SAMSUNG). No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. If the problem persists, refer to the external device's user manual. Signal Strength: (Digital channels only) An HD channel's reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. Energy Saving (Off / Low / Medium / High) This adjusts the brightness of the TV in order to reduce power consumption. Press any button except the volume button to turn on the screen. Until the screen turns on again, a distorted picture will be displayed for about 4 seconds. Software Upgrade Samsung may offer upgrades for your TV's firmware in the future. com or contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port. TV Side Panel Eco Sensor (Off / On) Eco Sensor detects surrounding light intensity using an optical sensor and adjusts the screen's brightness. Eco Sensor (Off / On): Turns the sensor off or on. If you adjust the Cell Light, the Eco Sensor will be set to Off. USB Drive Min Cell Light: Manually adjust the screen brightness (0~10). If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. Support Menu O MENUm Support ENTERE HD Connection Guide Refer to this information when connecting external devices to the TV. Self Diagnosis Self Diagnostic might take few seconds, this is part of the normal operation of the TV. [. . . ] Change the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the SOURCE button to select TV mode, and go to MENU Setup Plug & Play ENTERE (p. · Check the cable connections and reconnect them. · Loss of audio or video can be caused by using overly rigid or thick cables. [. . . ]