User manual SAMSUNG PN50C8000YF

[. . . ] when connecting a VCR , match the color of the connection terminal to the cable. When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). To begin, follow steps 1­3 in the previous section to connect the antenna or cable to your VCR and your TV. An S-Video cable may be included with your VCR. [. . . ] When an audio amplifier is connected to the AUDIO OUT [RAUDIO-L] jacks terminals: Decrease the volume of the TV, and adjust the volume level with the Amplifier's volume control. Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer. Connect a PC Audio Cable between PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. Connect a HDMI/DVI cable between the HDMI IN 2 jack on the TV and the PC output jack on your computer. 5mm Stereo/2RCA Cable cable between the DVI IN (HDMI 2) [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer. Each PC has a different back panel configuration. when connecting a PC , match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal. You can also use the POWER button on the TV. It may take a while for the picture to appear. With the power on, press the MENU button. To select the desired picture mode, follow the "Changing the Picture Standard" instructions number 1 to 2. Tint(G/R): Adjusts the color tint of the picture by compensating the red and green color. Available signal sources: TV, AV, AV2, S-Video, Component, Component2, PC, HDMI, HDMI2 You can choose only those external devices that are connected to the TV. If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. No sound or sound is too low at maximum volume. First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable broadcasting receiver, VCR, etc. Unplug the TV for 30 seconds, then try operating it again. Check that the "+" and "-" ends of the batteries are inserted correctly. Move the computer's mouse or press any key on the keyboard. Screen is black and power indicator light blinks steadily. [. . . ] This symptom is caused by external devices, not the TV. This is caused by minor systems operation and is not a defect. This appears when you press and hold the EXIT button for a while. The product settings are reset to the factory defaults. [. . . ]