User manual SAMSUNG PN51D440A5D QUICK GUIDE

[. . . ] Lift the cover on the back of the remote upward as shown in the figure to the right. When you turn on your TV for the first time, it automatically launches the Plug & Play function. With Plug & Play, you can select the On Screen Display language, set the clock mode, and launch the TV's channel memorizing process. [. . . ] Select Auto if you have a digital channel in your area. Select Manual if you don't, or if you have a cable or satellite box. If you select Manual, the clock setting screen appears. Plug & Play Set the Clock Mode. Clock Mode Auto Manual U Move E Enter m Skip 6 Select the daylight savings time setting: Off, On or Auto and then press the ENTERE button. when the Clock Mode is set to Auto. Plug & Play Set to daylight saving time. DST Off On Auto U Move E Enter m Skip This function is only available BN68-03326A-00 Step 6: Remote Control Remote Control Buttons and Functions Changing Channels and Adjusting the Volume Adjust the volume by pressing the Volume button on the remote. Change the channels by pressing the Channel button on the remote. If your TV is attached to a cable or satellite box, change the channel using the box's remote. Turns the TV on and off. Displays and selects the available video sources. You can also change the channels by pressing the z button on the front panel of your TV and adjust the volume by pressing the y button. Selecting a Source Changing the Picture Mode Your TV has three preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under specific conditions. To change the Picture mode, press the P. MODE button on your remote. The first time you press it, your TV displays the current setting. Thereafter, each time you press the P. MODE button, you change the mode of the picture on the screen. The Picture Modes are listed and described in the table below: Mode Dynamic Standard Movie Press to directly access channels. Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel "54-3", press "54", then press "-" and "3". Quickly select frequently used functions. Returns to the previous channel. Displays the channel list on the screen. MEDIA. P SLEEP To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct A B C D source. A source is a device, such as a Blu-ray/DVD S. MODE SLEEP player, a cable/satellite box, antenna or a cable TV input. Sources can be connected to your TV through P. MODE P. SIZE the HDMI, DVI, Component, Composite, or D-sub connections, or through the Antenna or Cable In connections. To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the SOURCE button on your remote. Each time you press the SOURCE button, you change to a different source. Viewing the On Screen Menus To view the On Screen Menus, follow these steps: 1. [. . . ] The first time you press it, your TV displays the current setting. Thereafter, each time you press the P. SIZE button, you change the size of the picture on the screen. The following sizes are available: x x If you select Auto, the current time will be set automatically using the time from a digital channel. 16:9 Wide screen 4:3 Standard screen Wide Fit If you select Manual, you can set the Month, Day, Year, Hour, Minute and am/pm directly by pressing up, down, left and right arrow button on your remote. [. . . ]