User manual SAMSUNG PN58C540

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. [. . . ] When done, press the Blue button on your remote. Wait until the connection confirmation message is displayed, and then press the ENTERE button. Howtosetupmanually To enter the Network connection values manually, follow these steps: 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. Press the button to go to the first entry field (IP Address). Use the number buttons to enter numbers. When done with each field, use the button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. Select your network, and then press the ENTERE button. 31), and follow the directions from that point on. IfYourTVFailstoConnecttotheInternet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect. To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet. The internet connection may fail because of a firewall problem. If this is the case, contact your Internet service provider. If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider, please contact Samsung Electronics at 1-800-SAMSUNG. You can connect to a mobile device without an access point through the "Samsung Wireless LAN Adapter" by using a peer to peer network. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. Input the generated NetworkName(SSID) and SecurityKey into the device you want to connect. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. [. . . ] This is part of the product's design and is not a defect. PIP functionality is only available when you are using a HDMI, PC or Component source. The cable/set top box remote control doesn't turn the TV on or off, or adjust the volume. Your settings are lost after 30 minutes or every time the TV is turned off. [. . . ]