User manual SAMSUNG PN63C8000YF

[. . . ] If this happens, contact the company that provided the DVD Player or Cable Box / Satellite receiver to confirm the HDMI version, then request an upgrade. Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration. When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack. Be sure C Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration. [. . . ] (If not, check your local electronics store. When a Digital Audio System is connected to the "DIGITAL AUDIO OUT (OPTICAL)" jack: Decrease the volume of the TV, and adjust the volume level with the system's volume control. An optical cable converts an electric signal into an optical light signal, and transmits it through glass fibers. Each Digital Audio System has a different back panel configuration. When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5. 1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. 1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV. When an audio amplifier is connected to the "AUDIO OUT [R-AUDIO-L]" jacks terminals: Decrease the volume of the TV, and adjust the volume level with the Amplifier's volume control. Each Amplifier / DVD Home Theater has a different back panel configuration. After all the available channels are stored, it starts to remove scrambled channels. Dynamic: Select the picture for high-definition in a bright room. standard: Select the picture for the optimum display in the normal environment. Movie: Select the picture for viewing movies in a dark room. Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. You can choose only those external devices If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable broadcasting receiver, VCR, etc. Unplug the TV for 30 seconds, then try operating it again. Check that the "+" and "-" ends of the batteries are inserted correctly. [. . . ] This appears when you press and hold the EXIT button for a while. The product settings are reset to the factory defaults. However, there may be few bright or dark pixels on the screen. No sound or sound is too low at maximum volume. [. . . ]