User manual SAMSUNG PS-42C92HR

[. . . ] PDP-TELEVISION (PLASMA DISPLAY PANEL) Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS Picture In Picture (PIP) Energy Saving TELETEXT (Option) SRS TruSurround XT Digital Natural Image engine Register your product at www. samsung. com/global/register Record your Model and Serial number here for future reference. _______________ User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. [. . . ] Mode : Custom Press the or button to select Sound, then press the Equalizer ENTER button. SRS TS XT : Off : Off Auto Volume Select the required option by pressing the or button, then Internal Mute : Off Sound Select : Main press the ENTER button. Reset Available options: Mode, Equalizer, SRS TS XT, Auto Volume, Internal Mute, Reset (If Game Mode is On) When you are satisfied with your setting, press the ENTER Move Enter Return button. < If Game Mode is On > Mode: Standard/Music/Movie/Speech/Custom TV Sound You can select the type of special sound effect to be used when Mode : Custom watching a given broadcast. Equalizer SRS TS XT : Off You can select these options simply by pressing the : Off Auto Volume S. MODE button on the remote control. Internal Mute : Off Sound Select : Main Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz Reset The television has several settings which allow you to control the sound quality. If you make any changes to these settings, the sound mode Move Enter Return is automatically switched to Custom. SRS TS XT: Off/On TruSurround XT is a patented SRS technology that solves the problem of playing 5. 1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all TV Equalizer multichannel formats. You can select these options simply by pressing the R SRS( ) button on the remote control. + + TruSurround XT, SRS and 0 0 Symbol are trademarks of SRS Labs, L Inc. TruSurround XT technology is Balance 100Hz 300Hz 1kHz 3kHz 10kHz incorporated under license from SRS Labs, Inc. Move Adjust Return Auto Volume: Off/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Internal Mute: Off/On If you want to hear the sound through separate speakers, cancel the internal amplifier. The +, - and MUTE buttons do not operate when the Internal Mute is set to On. Sound Select: Main/Sub When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. - Main: Used to listen to the sound of the main picture. - Sub: Used to listen to the sound of the sub picture. Reset If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. 4 5 TRADEMARK & LABEL LICENSE NOTICE Manufactured under license from Dolby Laboratories. [. . . ] No picture or black and white picture Adjust the colour settings. Check that the broadcast system selected is correct. Sound and picture interference Try to identify the electrical appliance that is affecting the television, then move it further away. Plug the television into a different main socket. [. . . ]