User manual SAMSUNG PS-42PNSB

[. . . ] ELECT Plasma Display with Media Station Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS PICTURE IN PICTURE TELETEXT ENG Safety Instructions ENG Do not place the PDP on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. Do not expose the PDP to extreme temperature conditions or to extreme humidity conditions. Do not expose the PDP to direct sunlight and other sources of heat. Never put objects of any kind into the television, and do not place a water-containing vessel on the PDP. [. . . ] Result: Press the joystick button to enter the picture menu. Select a option to be adjusted by moving the joystick up or down. To adjust the Contrast, Brightness, Sharpness, Colour, or Tint (NTSC only), move the joystick left or right. Move the joystick left Result: or right until you reach the setting. In the PC mode, you can not adjust the Colour and Tint, To adjust the Colour Tone, move the joystick left or right. Result: Normal - Cool1 - Cool2 - Warm2 - Warm1 2 3 4 Picture Mode Contrast Brightness Sharpness Colour Tint Colour Tone Move Select Custom Normal Menu 5 24 If you make any changes to these settings, the picture mode is automatically switched to the Custom. Changing the Picture Size ENG You can select the picture size which best corresponds to your viewing requirements. Function Language Time Size Image Lock AV Setup Melody Move Select English Normal 1 2 Press the MENU button. Result: Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. Move the joystick up or down until the Size is selected. Select a your required size by moving the joystick left or right. The following modes are available depending on the Result: input source. Auto Wide - Wide - Panorama - Zoom1 Zoom2 - Stretch - 14:9 - Normal Standard - Full - Normal (PC or DVI Mode) On Menu 3 4 5 You can select these options by simply pressing the P. Size (Picture Size) button on the remote control. If you watch a still image or the 4:3 mode for a long time, image may be burned onto the screen, view the PDP in Wide or Panorama mode as possible. Freezing the Current Picture Press the "Still" button to freeze the current picture. To return to normal viewing, press it again. In the PIP mode, the main and sub pictures are stilled at the same time. 25 Adjusting the Picture Settings (PC or DVI Mode) ENG Colour Tone Mode R G B Custom 1 2 3 Move Select Menu Preset to the PC mode by using the Source button. Press the MENU button. Result: Press the joystick button to enter the picture menu. Select a option (Contrast, Brightness, Sharpness) to be adjusted by moving the joystick up or down. Move the joystick left Result: or right until you reach the setting. Move the joystick up or down until the Colour Tone is selected. The options available in the Colour Tone group are Result: displayed with the Mode is selected Select the required mode by moving the joystick left or right. Result: Custom - Colour l - Colour 2 - Colour 3 To control the colour, select a option (R-red, G-green, B-blue) by moving the joystick up or down. Move the joystick left Result: or right until you reach the setting. Colour Tone Mode R G B Custom 4 5 Move Adjust Menu 6 26 Setting the Picture (PC Mode) 1 2 Preset to the PC mode by using the Source button. ENG Function Language Time Size Image Lock AV Setup Melody Move Enter English Normal Press the MENU button. Result: Move the joystick up or down until the Function is selected. [. . . ] If you cannot solve the problem using the instructions below, note the model and serial number of the PDP and contact your local dealer. No sound or picture Check that the mains lead has been connected to a wall socket. Check that you have pressed the Power button. Check the picture contrast and brightness settings. [. . . ]