User manual SAMSUNG PS-42Q7H

[. . . ] N During a storm conditions (especially when there is lightning) unplug the PDP from the mains socket and aerial. N Do not step on or twist the power cord. N Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. N Please use a soft and dry cloth (not containing volatile matter) when you clean the PDP. [. . . ] Press the coloured button corresponding to the topic that you wish to select; the available topics are given on the status line. Result: The page is displayed with other colored information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button. To display the subpage, see the following steps. Sub-pages can be scrolled by using the or button. 3 4 5 Press the Text/Off button to exit from the teletext display. 32 Connecting a PC ENG N Connect a PC cable (15pin) between the PC and PDP. N Connect an Audio cable between the Audio output jack on the PC and the Audio input jack (PC) on the PDP. Rear panel Viewing the PC screen: 1 Turn on PDP and select the PC mode by pressing the Source (or Source/PC) button on the remote control. Turn on PC and check for PC system requirements. (Refer to pages 34~36 for PC system requirements. ) Adjust the PC screen. (Refer to page 37. ) 2 3 PC Pin Configuration 1 6 11 7 12 2 8 13 14 3 4 10 15 5 15Pin Signal Cable (based on protruded pin) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PC IN Red (R) Green (G) Blue (B) Grounding Grounding (DDC) Red (R) Grounding Green (G) Grounding Blue (B) Grounding Reserved Sync Grounding Grounding Data (DDC) Horizontal sync. Clock (DDC) PC OUT Red (R) Green (G) Blue (B) Grounding Grounding (DDC) Red (R) Grounding Green (G) Grounding Blue (B) Grounding Reserved Sync Grounding Grounding Data (DDC) Horizontal sync. N When connecting a notebook PC to the PDP, make sure that the PC screen is displayed through only the PDP monitor (Otherwise, random signals might appear). N When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable connections. 35 PC Input Mode (50") ENG Standard VGA Dot x Line 640 x 350 640 x 400 720 x 400 640 x 480 Vertical frequency (Hz) 70. 086 85. 080 85. 080 70. 087 85. 039 59. 940 72. 809 75. 000 85. 008 Horizontal frequency (kHz) 31. 469 37. 861 37. 861 31. 469 37. 927 31. 469 37. 861 37. 500 43. 269 29. 838 35. 156 36. 072 37. 650 42. 925 37. 879 48. 077 46. 875 53. 674 48. 363 56. 476 60. 023 68. 677 67. 500 47. 700 60. 150 63. 981 79. 976 48. 200 Vertical polarity N N P P P N N N N P P P P N/P P P P P N N P P P P P P P N Horizontal polarity P P N N N N N N N N N N N N/P P P P P N N P P P N N P P N W-VGA 848 x 480 60. 000 72. 000 75. 000 85. 000 SVGA 800 x 600 56. 250 60. 317 72. 188 75. 000 85. 061 XGA 1024 x 768 60. 004 70. 069 75. 029 84. 997 1152 x 864 W-XGA SXGA WXGA+ 1280 x 768 1280 x 1024 1366 x 768 75. 000 60. 000 75. 000 60. 020 75. 025 60. 000 (N: Negative / P: Positive) Notes N The plasma panel of this monitor is composed 1366 pixels & 768 lines. That is, the best resolution is 1366 x 768. Thus, select 1366 x 768 resolution when you control the display setting, if your video card does not support 1366 x 768 resolution, the 1024 x 768 resolution is recommended. N The 1366 x 768 mode is only supported by a particular video card (PIXEL PERFECT made by IMAGINE GRAPHICS Ltd. ). N The 4:3 mode does work at the standard resolutions (640x480, 800x600, 1024x768, 1280x1024). 36 Controlling the Screen Color ENG 1 2 3 Preset to the PC mode by using the Source button. Select PICTURE Custom Contrast Brightness Sharpness Color Control Press the Menu button, then press the joystick button to enter the PICTURE menu. Move the joystick up or down to select the Color Control menu and move the joystick left or right. Move to the each option (R-Red, G-Green, B-Blue) Adjust the each option Move the joystick. . . up or down. Move Adjust Exit COLOR CONTROL left or right. 4 When you are satisfied with the settings, press the Menu button repeatedly to return to normal viewing. R G B 50 50 50 Move Adjust Exit Red 50 Adjusting the Screen Quality This feature is to remove or reduce picture noise, causing a tremble of screen and insecure boundary of image. SETUP Image Lock Scale Auto Power On Panel Lock Miscellaneous Move Enter Exit 4:3 On Off 1 2 Preset to the PC mode by using the Source button. Move the joystick up or down to select the SETUP menu and press the joystick button. Result: The Image Lock menu is selected. [. . . ] Please follow these guidelines to get the maximum performance from your PDP. N Identifying Problems - Do not put the PDP near extremely hot, cold, humid or dusty places. - Do not put the PDP near appliances that create magnetic fields. - Do not place the PDP on a rough and slanted surface, such as cloth or paper. [. . . ]