User manual SAMSUNG PS-50C7HD

[. . . ] PDP-TELEVISION (PLASMA DISPLAY PANEL) Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS Picture In Picture (PIP) Energy Saving TELETEXT (Option) SRS TruSurroundXT Digital Natural Image engine Digital Terrestrial Receiver This device is a Class B digital apparatus. Register your product at www. samsung. com/global/register User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. [. . . ] Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. English - 18 Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. 1 2 3 4 Press the MENU ( ) button to display the menu. ) Move TV Enter Pixel Shift Pixel Shift Horizontal Dot Vertical Line Time : On :4 :4 :4 Return TV Screen Burn Protection Pixel Shift All White Signal Pattern Press the . . . or button to select Setup, then press the ENTER/OK ( button. Press the . . . or button to select Screen Burn Protection, then press ) button. the ENTER/OK ( Select the required option by pressing the . . . or button, then press the ENTER/OK ( ) button. Available options: Pixel Shift, All White, Signal Pattern 5 6 When you are satisfied with your setting, press the ENTER/OK ( Press the EXIT button to exit. ) button. Move Enter Return Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen. - Set Pixel Shift to On by pressing the . . . or button, then press the ENTER/OK ( - Select the required option by pressing the . . . or button, then press the ENTER/OK ( Available options: Horizontal Dot, Vertical Line, Time ) button. ) button. Optimum condition for pixel shift; Horizontal Dot Vertical Line Time (minute) 4 4 4 All White: This function helps remove after images on the screen by changing the colour of pixels to white. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time. Signal Pattern: This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time. To remove after images on the screen, use either "All White" or "Signal Pattern" function. Although both of the two functions remove after images on the screen, "Signal Pattern" is more effective. The after image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after images on the screen. If after image is not improved after the execution of the function, repeat the function again. Press any button on the remote control to cancel this feature. Setting the Blue Eye You can set the power of Blue LED to be on. If the power is off when Blue Eye is off, the Blue LED goes off after 5 seconds. [. . . ] Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER ( ) button on the remote control. Check the picture contrast and brightness settings. Normal picture but no sound Check the volume. Check whether the volume MUTE button on the remote control has been pressed. [. . . ]