User manual SAMSUNG PS-50Q7H

[. . . ] Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. Heat on the top of the PDP TV The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. [. . . ] New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes. This function is not available in PC mode. Movie Plus: Off/On (PS42Q91H/PS42Q92H/PS50Q91H/PS50Q92H) You can view more natural skin and clear text even in fast moving scenes. The Wide Zoom, Zoom and Just Scan mode is not supported. 4 5 English - 22 Sound Features 1 2 3 TV Sound Press the MENU button to display the menu. Mode : Custom Press the or button to select Sound, then press the Equalizer ENTER button. SRS TS XT : Off : Off Auto Volume Select the required option by pressing the or button, then Internal Mute : Off Sound Select : Main press the ENTER button. Reset Available options: Mode, Equalizer, SRS TS XT, Auto Volume, Internal Mute, Reset (If Game Mode is On) When you are satisfied with your setting, press the ENTER Move Enter Return button. < If Game Mode is On > Mode: Standard/Music/Movie/Speech/Custom TV Sound You can select the type of special sound effect to be used when Mode : Custom watching a given broadcast. Equalizer SRS TS XT : Off You can select these options simply by pressing the : Off Auto Volume S. MODE button on the remote control. Internal Mute : Off Sound Select : Main Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz Reset The television has several settings which allow you to control the sound quality. Time Game Mode : Off 3 Press the or button to select Time, then press the ENTER Blue Screen : Off Melody : Off button. PC 4 Select the required option by pressing the or button, then Home Theatre PC : Off Light Effect : Off press the ENTER button. More Available options: Clock Set, Sleep Timer, Timer 1, Timer 2, Move Enter Return Timer 3 TV Time 5 When you are satisfied with your setting, press the ENTER button. Clock Set : 00 : 00 Sleep Timer : Off 6 Press the EXIT button to exit. Timer 1 : Inactivated Timer 2 : Inactivated Clock Set Timer 3 : Inactivated You can set the television clock so that the current time is displayed when pressing the INFO button on the remote control. You must also set the time if you wish to use the automatic on or off timers. Move Enter Return - Press the or button to select Month, Day, Year, Hour, or Minute. TV Timer 1 You can set the Month, Day, Year, Hour, or Minute On Time directly by pressing the numeric buttons on the remote 00 : 00 No control. Off Time 00 : 00 No In the event of a power interruption or the set being turned Repeat Volume off at the supply, the settings for the Clock will be lost. Once 10 Sleep Timer Programme You can select a time period of between 30 and 180 minutes 01 after which the television automatically switches to standby Move Adjust Return mode. - Select the preset time interval (Off, 30, 60, 90, 120, 150, or 180) for staying on by pressing the or button. [. . . ] Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER button on the remote control. Check the picture contrast and brightness settings. Normal picture but no sound Check the volume. Check whether the volume MUTE button on the remote control has been pressed. [. . . ]