User manual SAMSUNG PS42A416C1C

[. . . ] Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. Heat on the top of the PDP TV The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. [. . . ] - Standby Mode On: The blue LED lights while in Standby mode and it turns off when your TV is turned on. - Watching Mode On: The blue LED lights when watching TV and it turns off when your TV is turned off. Set the Light Effect to Off to reduce the power consumption. Energy Saving: Off/Low/Medium/High This feature adjusts the screen brightness depending on the surrounding lighting conditions. - Off: Switches off the Energy Saving mode. - Low: Operates in standard mode regardless of the surrounding illumination. - Medium: Enters Medium power saving mode regardless of the surrounding illumination. - High: Enters maximum power saving mode regardless of the surrounding illumination. HDMI Black Level: Normal/Low Using this function, you can adjust the image quality when the screen burn (appearance of black level, low contrast, low color, etc. ) is encountered by the HDMI input for RGB limited range (16 to 235). This function is active only when the externel input connects to HDMI(RGB signals). 4 5 English - 26 Using the Game Mode When connecting to a game console such as PlayStationTM or TV Setup XboxTM, you can enjoy a more realistic gaming experience by Plug & Play Language : English selecting game menu. Time Game Mode : Off 1 Press the MENU button to display the menu. Energy Saving : Off HDMI Black Level : Low 1 Press the MENU button to display the menu. PIP 2 Press the or button to select Setup, then press the Screen Burn Protection ENTER/OK button. 3 Press the or button to select PIP, then press the ENTER/ OK button. Move Enter 4 Select the required option by pressing the or button, then press the ENTER/OK button. TV PIP Available options: PIP(On/Off), Source, Size, Position, PIP : On Source : TV Programme Size : Position : 5 When you are satisfied with your setting, press the ENTER/OK Programme :P 1 button. PIP: On/Off You can activate or deactivate the PIP function. Move Enter You can select these options simply by pressing the PIP button on the remote control. Source: TV/Ext. 1/Ext. 2/AV You can select a source of the sub-picture. Size: / / You can select a size of the sub-picture. If main picture is in PC and Component mode, Size is not available. Position: / / / You can select a position of the sub-picture. [. . . ] Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER button on the remote control. Check the picture contrast and brightness settings. Normal picture but no sound Check the volume. Check whether the volume MUTE button on the remote control has been pressed. [. . . ]