User manual SAMSUNG PS42A466P2W

[. . . ] To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. Heat on the top of the PDP TV The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. [. . . ] Press the or button until you reach the optimal setting. Changing the adjustment value will refresh the adjusted screen. Edge Enhancement: Off/On You can emphasize object boundaries. English - 1 Picture Options You can set detailed picture settings. 1 4 5 Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the or button to select Picture Options, then press the ENTER button. Select the required option by pressing the or button, then press the ENTER button. When you are satisfied with your setting, press the ENTER button. In PC mode, you can only make changes to the Colour Tone, Size and Screen Burn Protection from among the items in Picture Options. TV Picture Mode : Standard Cell Light Contrast Brightness Sharpness Colour Tint G 50 Detailed Settings Picture Options Reset : OK Move TV Enter 0 45 50 50 R 50 Return Colour Tone: Cool/Cool1/Normal/Warm1/Warm When the picture mode is set to Dynamic or Standard, Warm1 and Warm cannot be selected. Picture Options Colour Tone : Normal Size : 1: Digital NR : Auto DNle : Off HDMI Black Level : Normal Blue Only Mode : Off Screen Burn Protection Size: 1 : /Wide Zoom/Zoom/4 : /Just Scan TV Picture Options You can select the picture size which best corresponds to Colour Tone : Normal your viewing requirements. Size : 1: - 1 : : Sets the picture to 16:9 wide mode. Digital NR : Auto - Wide Zoom: Magnify the size of the picture more than 4:3. DNle : On HDMI Black Level : Normal Move the screen up/down using the or button after Blue Only Mode : Off selecting the by pressing the or ENTER button. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes. This function is not available in PC mode. DNIe is only available in Dynamic mode. HDMI Black Level: Normal/Low Using this function, you can adjust the image quality when the screen burn (appearance of black level, low contrast, low colour, etc. ) is encountered by the HDMI input for RGB limited range (16 to 235). This function is active only when the external input connects to HDMI(RGB signals). Blue Only Mode: Off/On This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Color and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Color Bar Patterns, without using an additional Blue Filter. Blue Only Mode is available when the picture mode is set to Movie or Standard. Screen Burn Protection: Pixel Shift/White/Scrolling/Side Gray To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. - Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen. [. . . ] Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER button on the remote control. Check the picture contrast and brightness settings. Normal picture but no sound Check the volume. Check whether the volume MUTE button on the remote control has been pressed. [. . . ]