User manual SAMSUNG PS42Q99HPX/HAC

[. . . ] PDP-TELEVISION (PLASMA DISPLAY PANEL) Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS Picture In Picture (PIP) Energy Saving TELETEXT (Option) SRS TruSurround XT Digital Natural Image engine Register your product at www. samsung. com/global/register Record your Model and Serial number here for future reference. _______________ User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. [. . . ] Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz TV Equalizer The television has several settings which allow you to control the sound quality. R R/L Sound Balance Adjustment: + + To adjust the sound balance of the R/L speakers. 0 0 Bandwidth Adjustment(100Hz, 300Hz, 1kHz, 3kHz, L 10kHz) : To adjust the level of different bandwidth Balance 100Hz 300Hz 1kHz 3kHz 10kHz frequencies. If you make any changes to these settings, the sound Move Adjust Return standard is automatically switched to Custom. SRS TS XT: Off/On TruSurround XT is a patented SRS technology that solves the problem of playing 5. 1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. You can select these options simply by pressing the SRS button on the remote control. Auto Volume: Off/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Continued. . . English - 21 Internal Mute: Off/On If you want to hear the sound through separate speakers, cancel the internal amplifier. The VOL +, VOL -, S. MODE, and MUTE buttons do not operate when the Internal Mute is set to On. Sound Select: Main/Sub When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. - Main: Used to listen to the sound of the main picture. - Sub: Used to listen to the sound of the sub picture. Reset If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. Selecting the Sound Mode (depending on the model) The DUAL I-II button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either "DUAL-I" or "Stereo", depending on the current transmission. Type of broadcast Regular broadcast (Standard audio) Regular + NICAM Mono NICAM Stereo On-screen indication Mono (Normal use) NICAM Mono (Normal) NICAM Stereo NICAM Stereo Mono (Normal) NICAM DUAL-I/II NICAM DUAL-1 NICAM DUAL-2 Mono (Normal) A2 Stereo Regular broadcast (Standard audio) Bilingual or DUAL-I/II Mono (Normal use) DUAL I Stereo Stereo DUAL II Mono (Forced mono) If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono. If the stereo signal is weak and automatic switching occurs, switch to Mono. When receiving a mono sound in the AV mode, connect to the "AUDIO-L" input connector on the panel (front or side). If the mono sound comes out only from left speaker, press the DUAL I-II button. English - 22 Time Features 1 2 3 4 Press the MENU button to display the menu. [. . . ] No sound or picture Check that the mains lead has been connected to a wall socket. Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER button on the remote control. Check the picture contrast and brightness settings. Normal picture but no sound Check the volume. [. . . ]