User manual SAMSUNG PS50A417

[. . . ] Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". [. . . ] Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of setting the Screen refresh rate. 5 Click on OK to close the window, then Click on OK button to the Display Properties window. Automatic re-booting may commence at this moment. Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video Signal Resolution (Dot X Line) 640 x 350 720 x 400 640 x 480 IBM PC / AT Compatible Vertical frequency (Hz) 70. Available options: Image Lock, Position, Auto Adjustment, Image Reset 5 When you are satisfied with your setting, press the ENTER/OK button. Image Lock: Coarse/Fine The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1 Press the or button to select Coarse or Fine , then press the ENTER/OK button. Press the or button to adjust the screen quality, vertical stripes may appear or the picture may be blurry. Image Reset You can replace all image settings with the factory default values. You can view higher quality pictures by configuring the screen TV Setup settings in PC Mode. Plug & Play Language : English If you set the Home Theatre PC function to On, you can Time configure the Detailed Settings (when Picture Mode is set to Game Mode : Off Blue Screen : Off Standard or Movie) as in PC Mode. melody : Off PC 1 Press the MENU button to display the menu. Home Theatre PC : Off Press the or button to select Setup, then press the Light Effect : Off More ENTER/OK button. Move Enter Press the or button to select Home Theatre PC, then press the ENTER/OK button. This function is available only in PC mode. Operation The company does not guarantee the normal 6 supported of the DTV menu for countries other than the countries (England, Germany, France, Italy, Spain, Austria) because only these country standards are supported. In addition, when the country of the broadcast stream differs from the country selected by the current user, the string appearing in the channel banner, Info, Guide, Channel List, etc. Preset to the DTV mode by using the TV/DTV button on your remote control. To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration. [. . . ] Move the computer's mouse or press any key on the keyboard. The damaged picture appears in the corner of the screen. If Just Scan is selected in some external devices, the damaged picture may appear in the corner of the screen. This symptom is caused by external devices, not TV. [. . . ]