User manual SAMSUNG PS50A450P1D

[. . . ] Plasma TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/global/register Model Serial No. Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM SOUTH AFRICA U. A. E Customer Care Centre 1300 362 603 800-810-5858 010-6475 1880 3698-4698 3030 8282 1800 110011 0800-112-8888 0120-327-527 1800-88-9999 0800SAMSUNG(726-7864) 1800-10-SAMSUNG(726-7864) 1800-SAMSUNG(726-7864) 1800-29-3232 02-689-3232 0800-329-999 1 800 588 889 0860-SAMSUNG(726-7864) 800-SAMSUNG (726-7864) 8000-4726 Web Site www. samsung. com/au www. samsung. com. cn www. samsung. com/hk www. samsung. com/in/ www. samsung. com/id www. samsung. com/jp www. samsung. com/my www. samsung. com/nz www. samsung. com/ph www. samsung. com/sg www. samsung. com/th www. samsung. com/tw www. samsung. com/vn www. samsung. com/za www. samsung. com/mea BN68-01445K-01 User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". [. . . ] - Zoom: Magnify the size of the picture vertically on screen. - 4:: Sets the picture to 4:3 normal mode. - Just Scan: Use this function to see the full image without any cutoff when HDMI(720p/1080i), Component(1080i) signals are input. After selecting Just Scan in HDMI (100i) or Component (100i) mode: Press the or button to select Position, then press the ENTER button. Press the , , or button to move the picture. Reset: Press the or button to select Reset, then press the ENTER button. With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off or a specific colour appears on the screen. For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p) connection of 50 and 60Hz, only the input source is supported. You can change the picture size simply by pressing the P. SIZE button on the remote control. Depending on the input source, the picture size options may vary. The items available may differ depending on the selected mode. In PC Mode, only "16:9" and "4:3" mode can be adjusted. Continued. . . English - Positioning and Sizing the screen using Zoom - Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction using the or button as well as the screen size. - Move the screen up/down using the or button after selecting the by pressing the or button. - Resize the screen vertically using the or button after selecting the by pressing the or button. Digital NR: Off/Low/Medium/High/Auto Picture Options If the signal received by the television is weak, you can activate this feature to reduce any static and ghosting that Colour Tone : Normal may appear on the screen. Size : 16:9 When the signal is weak, select one of the other Digital NR : options until the best picture is displayed. Off HDMI Black Level : Low HDMI Black Level: Normal/Low Medium Using this function, you can adjust the image quality when Real 100Hz Demo : Off High the screen burn (appearance of black level, low contrast, Blue only mode Auto low colour, etc. ) is encountered by the HDMI input for RGB Screen Burn Protection limited range (16 to 235). This function is active only when the external input Enter Return Move connects to HDMI(RGB signals). Real 100 Hz Demo: Off/On You can get a clear distinction between "Real 100Hz" and 50Hz, especially when watching fast moving scenes. Therefore, when seeing slow moving scenes, you will not be able to distinguish between "Real 100Hz and 50Hz. " Demo 100Hz works only with 50Hz signal. Real 100Hz demo mode is provided for shop demonstration with special pictures. Blue Only Mode: Off/On This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc. [. . . ] This interference often occurs due to the use of an indoor aerial. Remote control malfunctions Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check that the "+" and "­" ends of the batteries are inserted correctly. [. . . ]