User manual SAMSUNG PS50A551S3

[. . . ] to avoid such image retention , reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. Heat on the top of the PDP TV The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. [. . . ] Although both of the two functions remove after images on the screen, Signal Pattern is more effective. The after image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after images on the screen. If after image is not improved after the execution of the function, repeat the function again. Press any button on the remote control to cancel this feature. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer. Click on Settings tab, then set the Display Mode with reference to the Display Modes Table. You do not need to change the Colours settings. A new settings dialog box will be displayed. 4 Click on the Monitor tab, then set the Screen refresh rate with reference to the Display Modes Table. While viewing a channel, additional information about the current programme may be displayed. Viewing the DTV Menu After installing your antenna system and TV with appropriate connectors. 1 Auto Store You can update the channel list when the broadcaster adds new services or if you move the TV to a new location. When it has finished, the number of scanned services will be displayed. - The existing favourite channel list will not be deleted when the channel list is updated. - To stop the scan before it has finished, press the ENTER/OK button with Stop selected. - Frequency Move Enter Return You can specify the frequency (KHz) using the Manual Store numeric buttons (0~9). If you do not know the exact frequency, follow the above step to select the frequency Channel Frequency Bandwidth automatically using channel. Search When it has finished, channels are updated in the channel Adjust Return list. you can input by pressing the button on the remote control. You can not change only frequency and when changing a channel the Frequency will be automatically changed. [. . . ] This interference often occurs due to the use of an indoor aerial. Check that the "+" and "­" ends of the batteries are inserted correctly. Screen is black and power indicator light blinks steadily On your computer check; Power, Signal Cable. the TV is using its power management system. [. . . ]