User manual SAMSUNG PS50A566

[. . . ] Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". to avoid such image retention , reduce the degree of brightness and contrast of the screen when displaying a still image. [. . . ] it will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade. Alternative Software --/--/--_-------Please be careful to not disconnect the power or remove the USB drive while upgrades are being Enter Move Return applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. bY Channel : Upgrades the software using the broadcasting signal. Standby Mode Upgrade : To continue software upgrade with master power on, Select On by pressing the or button. 45 minutes after entering standby mode , a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed. You can install the CAM anytime whether the TV is ON or OFF. Insert the CI CARD into the CAM in the direction of the arrow until it fits. Insert the CAM with the CI CARD installed into the common interface slot. Check if you can see a picture on a scrambled signal channel. CI Menu Main menu Module information Smart card information Language Software Download Press Ok to select, or Exit to quit But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer. 2 Click on Settings tab, then set the Display Mode with reference to the Display Modes Table. You do not need to change the Colours settings. A new settings dialog box will be displayed. [. . . ] Check that the "+" and "­" ends of the batteries are inserted correctly. Screen is black and power indicator light blinks steadily On your computer check; Power, Signal Cable. the TV is using its power management system. Move the computer's mouse or press any key on the keyboard. [. . . ]