User manual SAMSUNG PS50B610S2P

[. . . ] To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. Heat on the top of the PDP TV The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. [. . . ] The ­ + and MUTE buttons do not operate when the TV Speaker is set to Off. When TV Speaker is set to Off, you can operate only Sound Select (in PIP mode) in Sound menu. Sound Select: Main/Sub When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. - Main: Used to listen to the sound of the main picture. - Sub: Used to listen to the sound of the sub picture. English - Selecting the Sound Mode (depending on the model) The DUAL I-II button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either "DUAL-I" or "Stereo", depending on the current transmission. Easy Setting 1 Press the TOOLS button on the remote control. Press the or button to select Dual I-II. Press the or button to select the required option. Type of broadcast Regular broadcast (Standard audio) Regular + NICAM Mono NICAM Stereo NICAM Stereo On-screen indication Mono (Normal use) NICAM NICAM Stereo NICAM DUAL-1 NICAM DUAL- Mono (Normal use) DUAL I Stereo DUAL II Mono (Forced mono) Mono (Normal) Mono (Normal) Mono (Normal) Tools Anynet+ (HDMI-CEC) Picture Mode Sound Mode Sleep Timer SRS TS XT Energy Saving DualI-II Move : Standard : Custom : Off : Off : Off Mono Adjust Exit NICAM DUAL-I/II Regular broadcast (Standard audio) Bilingual or DUAL-I/II Stereo A2 Stereo If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono. If the stereo signal is weak and automatic switching occurs, switch to Mono. Connecting Headphones (Sold separately) You can connect a set of headphones to your set if you wish to watch a TV program without disturbing other people in the room. When you insert the head set jack into the corresponding port, you can operate only "Auto Volume" and Sound Select(in PIP mode) in Sound menu. Prolonged use of headphones at a high volume may damage your hearing. Programme : When the On Time is active, you can turn on a specific channel. You can set the hour, and minute directly by pressing the number buttons on the remote control. Auto Power Off timer "On", the TV will eventually turn off, if no controls are operated for 3 hours When you set the after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating, which may occur if a TV is on for too long time. Language / Light Effect / Melody / Entertainment / Energy Saving 1 4 5 Press the MENU button to display the menu. Press the or button to select Setup, then press the ENTER button. Select the required option by pressing the or button, then press the ENTER button. When you are satisfied with your setting, press the ENTER button. Press the EXIT button to exit. TV Setup Plug & Play Language Time Light Effect Auto Wall-Mount Melody Entertainment Energy Saving PIP Move : English : In Standby : Off : Off : Off Enter Language It is variable depending on the model. When you start using the television for the first time, you must select the language which will be used for displaying menus and indications. Light Effect: Off/ In Standby/In Watching TV/Always You can turn on/off the blue LED on the front of TV according to the situation. Use it for saving power or when the LED dazzles your eyes. - In Standby: The blue LED lights while in Standby mode and it turns off when your TV is turned on. - In Watching TV: The blue LED lights when watching TV and it turns off when your TV is turned off. [. . . ] Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER button on the remote control. Check the picture contrast and brightness settings. Check if TV Speaker is set to Off. Normal picture but no sound Check the volume. Check whether the volume MUTE button on the remote control has been pressed. [. . . ]