User manual SAMSUNG PS50C490

[. . . ] Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. Heat on the top of the PDP TV The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. [. . . ] The last part (host address) should be 2. changed. IP Address: 123. 456. 789. ** ) Run a Network Test to check the network settings. Installing the DLNA Application To play content on the PC on the TV, you have to first install the application. System Requirements 1. Insert the Programme CD supplied with this TV into your PC. 20MB of free hard disk space is needed for the programme installation. N If you share files, up to 20MB of hard disk drive space is required for each 100 files. N If you cancel file sharing, the hard disk drive space used for the thumbnail information is also freed. Supported Formats 1. Video: MPEG1(mpg, mpeg), MPEG2 PS/TS(mpg, mpeg, trp, ts, tp), divx(mpg, mpeg, avi), MPEG4/H. 264 (mpg, mpeg) English - 39 Install the application 1. Run the Setup. exe file on the Programme CD supplied with the product. N Alternatively, you can download the file from www. samsung. com. Install the SAMSUNG PC Share Manager as shown in the figures below. 3. When the installation is complete, the PC Share Manager icon appears on your Desktop. The Set Changed State menu applies changes to shared folders to the data saved with the PC share programme. Since applying changes to the internal data is a time-consuming process, this function enables users to apply changes to the data only when required. Until the Set Changed State menu is selected, the changed state of the shared folder is not applied to the server. Changes to the shared folders are not applied to your PC until you select the Set Changed State menu. · Method 1: Select the Share menu and select the Refresh DB sub-menu. · Method 2: Click the Set Changed State icon. English - 42 Setting the Access Permission To enable the TV to find your PC, the TV must be set to Set Device Policy in the Access Permission Settings window. In addition, the PC server and the TV must be on the same subnet. · Method: Select the Share menu and select Set Device Policy. You can change the access permissions by using the Allow Accept / Deny button. To delete an item, select the item and select Delete Item. Server Server You can run or stop using your PC as a server. You can determine whether to start the PC server automatically when Windows starts. [. . . ] In case of any license issues related to OpenSSL please contact openssl-core@openssl. org. OpenSSL License Copyright (c) 1998-2007 The OpenSSL Project. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. [. . . ]