User manual SAMSUNG Q10 TLC 933

[. . . ] Notices No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical photocopying, recording or otherwise, without the prior written permission of the manufacturer. The information within this manual is subject to change without notice. The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein; nor for incidental or consequential damages resulting from the furnishing, performance or use of this material. Microsoft Windows is a registered trademark of the Microsoft Corporation. [. . . ] Do not remove a disc when this LED is on. Removing the Audio/Multimedia CD To remove the CD follow the instructions below: 1. Click Start > All Programs > Accessories > Entertainment > Windows Media Player to open the Windows Media Player window, if not already open. Click Stop in the Windows Media Player window or simply close the Windows media player. The drive tray opens and you can remove the CD from the CD-ROM drive. For more information on playing compact discs, see the Help menu in the Windows Media Player window. 40 Users Manual Dolby Digital & Home Theater System (S/PDIF Port) This product supports 5. 1 channel output, which is a basic function for home theater systems and DVD drives. It provides 3D surround sound and a vivid screen. Home theater system usually consists of a TV, DVD, 5. 1 channel speakers, and a digital amplifier to provide a high-resolution vivid (MPEG2) picture and 3D surround sound (Dolby 5. 1 or DTS). With a home theater system, you can enjoy the same vivid picture and sound in your home that you would in a movie theater. You will need the following to enjoy a home theater system: · 5. 1 channel speaker system / Digital amplifier (Purchased separately). · DVD drive and DVD Program (Option). Connect the digital amplifier to the S/PDIF port on the left side of the docking station. Connect the speakers to the digital amplifier. TV Digital Amplifier Front Left Speaker Computer Center Speaker Sub Woofer Front Right Speaker Surround Left Speaker Surround Right Speaker If your computer supports a TV-Out port, you can connect and enjoy a large screen. After connecting the TV, you will need to select the TV as the display device using the Windows Display Properties window. Multimedia Functions/Equipment 41 After making all connections, ensure you enable S/PDIF: a. When purchasing a 5. 1 channel speaker system, make sure it supports a S/PDIF (coaxial) port. Using the S/PDIF Connection 1. Click Start > All Programs > Accessories > Entertainment > Volume Control, the Master Volume control window pops up. Operating systems other than Windows XP If you are using an operating system other than Windows XP, double click volume icon in the taskbar. If your Advanced Controls is not available (grayed out), insure you have the video drivers installed that were provided on the software CD. 2. Click the Advanced button and the Advanced Controls for Master Volume window pops up. Verify the "1 SPDIF" check box is checked. 42 Users Manual To enjoy the 5. 1 channel speaker quality fully, your DVD titles and CDs must support 5. 1 channels. Enabling S/PDIF on the DVD Program When using 5. 1 channel speakers, you will need to install the "Power DVD" program on the DVD Installation CD (supplied Separately) and then set it up as described below: 1. Run the "Power DVD" program and click the settings button. , the configurations window pops up. Settings Button 2. On the "Audio tab", change the Audio Output Interface setting to "Use S/PDIF Output". Audio Output Interface 3. You are ready to enjoy your home theater system with your own DVD's. · · If you have enabled S/PDIF in the DVD program, the computer speakers and headphone are not functional. To control the sound volume on your 5. 1 channel speaker system, use the control on the digital amplifier. (Please refer to the speaker manual. ) Multimedia Functions/Equipment 43 Volume Control Using the Keyboard Changing the volume with your keyboard. Use <Fn+F7> to decrease the volume or <Fn+F8> to increase the volume. Using the Volume Control Icon Double-Click icon in the active program tray. [. . . ] Plug and Play A plug and play operating system automatically configures computer components to work with your system. With this type of operating system, you normally do not need to set jumpers on devices or set memory addresses or IRQs. RAM (random access memory) The computer's system memory, including conventional and extended memory. Information stored in RAM is temporary, and is erased when the system is turned off. [. . . ]