User manual SAMSUNG QWIKLASER 5100A

[. . . ] 00-Cover&Contents 5/10/99 4:35 PM Page 1 LASER PRINTER ML-5100A User's Manual 00-Cover&Contents 5/10/99 4:35 PM Page 2 This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any damages, direct or indirect, arising from or related to use of this manual. All rights reserved. ML-5100A and Samsung logo are trademarks of Samsung Electronics Co. [. . . ] For detailed information about each setting, click Help at the bottom of the dialog box. About This tab shows the software version and useful information about your printer. Default button at the bottom of the dialog box restores the factory default setting. Operating Your Printer 33 03-Troubleshooting 5/10/99 4:04 PM Page 8 Samsung ML-5100A PCL 6 driver includes 5 tabs. Paper Options Using this tab, you can change the number of copies, page orientation, paper size, paper source, and so on. For detailed information about each setting, click Help at the bottom of the dialog box. Graphics Using this tab, you can change graphics mode, resolution, text mode, toner saver, and so on. For detailed information about each setting, click Help at the bottom of the dialog box. Overlays Using this tab, you can create, delete and load over lay. For detailed information about each setting, click Help at the bottom of the dialog box. Watermarks Using this tab, you can edit, save, delete and control watermartk. For detailed information about each setting, click Help at the bottom of the dialog box. About This tab shows the software version and useful information about your printer. 34 Operating Your Printer 03-Troubleshooting 5/10/99 4:04 PM Page 9 Remote Control Panel (RCP) for Windows User Windows users can change print setting with the Remote Control Panel, program. Windows 3. x 1. From Program Manager, double-click File Manager. In the 5100util, double-click winrcp. exe. The Remote Control Panel screen appears. After you change settings, you must send it to the printer by pressing the Send button. Windows 95/98/NT 4. 0 1. The Remote Control Panel screen appears. After you change settings, you must send it to the printer by pressing the Send button. Operating Your Printer 35 03-Troubleshooting 5/10/99 4:04 PM Page 10 The Remote Control Panel dialog box includes six tabs. PRINTER Power Save Determines the length of time the printer waits after a job is printed before it goes to a reduced power state. If the printer is used constantly, select OFF which keeps the printer ready to print with the minimum warm-up time. This uses more energy to keep the printer warm and ready to print. Timeout Determines the amount of time in seconds the printer waits before printing the last page of a print job that does not end with a command to print the page. Econo Mode To get the most from your toner supply, set Econo Mode to ON. If you set Econo Mode to ON, print quality may be reduced. Jam Recovery If paper jams as it exits to the output bin, the data on the jammed page will be lost. If you set Jam Recovery feature to ON, the printer keeps the image for a printed page until the printer signals that the page has successfully exited the printer. With the feature set to OFF, the printer does not reprint a page that has jammed. PAGE SETUP Paper Size Sets the paper size. Lines Per Page Use this menu item to change the number of lines that print on each page. The setting can range from 5 to 228 lines per page. Copies Sets the number of copies printed for each page. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. [. . . ]