User manual SAMSUNG RHF100EE

[. . . ] Make sure to read the followings and use the ventilator properly. Keep this user's manual together with the installation manual in a handy place so that you can find it whenever you need to see it after reading this manual thoroughly. WARNING Install the cables with This indicates the possibility of serious injury or death. supplied cables firmly. Fix them securely so that external force is not to exerted to the terminal board. If the connection or fixing is incomplete, heat generation, electric shock or fire may occur. Never spill any kind of liquid into the product. [. . . ] The use of defective parts could cause an injury or leakage of water due to fire, electric shock, the unit falling, etc. It may cause fire or malfunction. Do not connect the electric The manufacturer declines air intake or outlet. Do not spray inflammable any liability for damage resulting from modifications or errors in the electrical or hydraulic connections. Keep children away from the product. E-3 ENGLISH CAUTION This indicates the possibility of serious injury or damage to environments when operated incorrectly. If the power plug is damaged, replace it by the manufacturer or qualified personnel to avoid the risk. Do not use the product to maintain machine, food, pet, plant or cosmetics. It may cause loss of property. Do not clean the product by spraying water directly or with benzene, thinner or alcohol. Unplug the product before get repaired. Be sure to insert the dust Do not let the coming air reach to a pet or plant directly for a long period of time. filter and clean the filter at least twice a year. If dust accumulates in the filter, it may decrease the efficiency of the product. Failure to observe the installation instruction, or use of the unit under conditions other than those indicated in the manual will immediately invalidate the product warranty. packaging material used for your new appliance are compatible with the environment and can be recycled. Turn off the product and clean Put gloves on when you after it stops operating. Do not use substances such clean the dust filter or heat exchange element. You may get hurt. All of the manufacturing and as benzene, thinner or alcohol to clean the surface of the product. Do not pull the electric wire or touch the power plug with wet hands. When you need to dispose of the unit, consult your dealer. Do not touch the pipes connected to the product. Be sure that the dust filter is not exposed to direct sunlight. Dispose of the packaging material in accordance with the local requirements. Do not attempt to repair, move, modify or reinstall the product on your own. Make sure that these installations are carried out by qualified personnel to avoid electric shock or fire. The maximum input power and current is measured according to the IEC Standard and the input power and current is measured according to ISO standard. E-4 Name of Each Part ENGLISH Body 025 Maintenance cover Exhaust Air Heat exchange element Outdoor Air Dust filter Supply Air Electrical component box Return Air Inspection hole 025 Body 035/050/080/100 Return Air Supply Air Electrical component box Exhaust Air Outdoor Air Dust filter Inspection hole (660mm x 600mm) 035/050/080/100 Maintenance cover Heat exchange element Inspection hole There is an inspection hole for cleaning and maintaining the dust filter and heat exchange element. Lack of installation and maintenance space may cause injury or malfunction. Model 035/050 080/100 'A' Inspection hole 'A' (mm) 450 X 450 550 X 550 E-5 Cleaning the Dust Filter 025 Clean the dust filters at least twice a year. However, the cleaning frequency may vary according to the used period and condition of the ventilator. Clean the dust filters more frequently in dusty place. Make sure that the power supply is disconnected before cleaning the ventilator. Screw 1 Remove 3 screws on the maintenance cover. 2 Take off the maintenance cover from the ventilator. 3 Detach the dust filters by pulling them forward. There are totally 2 dust filters on both sides of the heat exchange element. Remove all dust on the dust filters with a vacuum cleaner or a brush. 4 Dust filter 5 Reassemble the dust filters and the maintenance cover. Make sure to insert the dust filters correctly. If not, dust may accumulate on the heat exchange element decreasing the efficiency. Change the dust filters in every two years. However, changing frequency may vary according to the used period and condition. If the dust filter is damaged, purchase it individually in a customer care center or an agency that you bought the product. Make sure to turn off the sub power supply. E-6 035/050/080/100 Clean the dust filters at least twice a year. However, the cleaning frequency may vary according to the used period and condition of the ventilator. Clean the dust filters more frequently in dusty place. Make sure that the power supply is disconnected before cleaning the ventilator. 1 Remove 2 screws on the maintenance cover. 2 Take off the maintenance cover from the ventilator. Screw 3 Detach the dust filters by pulling them forward. There are totally 4 dust filters on both sides of the heat exchange element. [. . . ] Clean the heat exchange element more frequently in dusty place. Make sure that the power supply is disconnected before cleaning the ventilator. 1 Remove 2 screws on the maintenance cover. 2 Take off the maintenance cover from the ventilator. Screw 3 Detach the 2 heat exchange elements in order. There are 2 heat exchange elements in the ventilator. Make sure clean them at once. 4 Remove all dust and particles on the heat exchange elements with a nozzle of a vacuum cleaner. [. . . ]