User manual SAMSUNG RZ80EDMH

[. . . ] Freezer user manual English imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Free Standing Appliance features of your new freezer KEY FEATURES OF YOUR NEW FREEZER Your Samsung Freezer comes equipped with various innovative storage and energy-efficient features. · Alone or together, whichever way you want You can put the freezer together with Samsung Twin refrigerator to use it just like a Side by Side refrigerator or use the freezer alone. · Power Freeze Speed up the freezing process with the Power Freeze function. It is fastest way to freeze ice, foods or beverages that need to be chilled quickly. · Eco Function Save energy and electricity bills with Eco function that adjusts the temperature range. · Door Alarm A helpful beeper alerts you if the door is not closed. CE Notice This product has been determined to be in compliance with the Low Voltage Directive (2006/95/EC), the Electromagnetic Compatibility Directive (2004/108/EC) and Energy efficiency Directive (96/57/EC) of the European Union. For easy future reference, write the model and serial number down. You will find your model number and serial number on the left side of the freezer. Model # Serial # 2_ features safety information SAFETY iNFORmATiON · Before operating the appliance, please read this manual thoroughly and retain it for your reference. [. . . ] · Do not install the freezer in a place with the temperature lower than 10°C. Pull the unit straight out when installing, servicing or cleaning behind the freezer and push it straight back after work is complete. Make sure your floor can support fully loaded freezer. CAUTION 10_ setting up REVERSiNg THE FREEZER DOOR WARNING Before you reverse the freezer door, make sure to unplug the freezer. If this operation is performed by After sales service, it is not covered as the warranty service. 01 SETTiNg UP Required Tools (Not provided) Phillips Head Driver (+) Flat Head Driver (-) 10mm Socket Wrench (for bolts) 8mm Socket Wrench (for bolts) Spanner (for hinge shaft) 4mm Hex Wrench (for bottom hinge shaft) 1. Remove 2 screws on the top of the freezer. 2. Remove the plastic cover and make sure to disconnect the wire connected to it. After removing the plastic cover, check the parts for reversing the door. CAUTION Be careful not to damage the electrical wires when removing the plastic cover. 3. Disconnect the wires and then remove 3 bolts. WARNING Make sure your freezer is unplugged before handling electrical wires. setting up _11 setting up your freezer REVERSiNg THE FREEZER DOOR 4. Remove the door from the lower hinge by carefully lifting the door straight up. CAUTION Freezer door is heavy, be careful not to injure yourself when removing the freezer door. 5. Separate the front leg cover after removing 2 screws. 6. Unscrew 3 bolts tightening the hinge and also unscrew 3 bolts on the bottom right side by the front leg where removed hinge will be attached. 10mm 10mm 7. Separate the hinge shaft by using hex wrench first. Unscrew the bolt to remove the hinge riser and switch the side of the hinge shaft and the hinge riser. Hingeshaft 8mmBolt Hingeriser 12_ setting up 8. Attach the hinge on the bottom right side of the freezer where bolts were previously removed in step 6. Screw the bolts that were removed on the bottom left side of the freezer for the future usage. 01 SETTiNg UP 10mm 10mm 9. Remove the screws on the bottom right and left side of the freezer door. Switch the side of the door stopper from left to the right. Hingeriser Hingeriser 10. Remove the wire cover on top of the freezer door to switch the side of the wires. 11. Remove the hinge and the grommet from the freezer door. Detach the left side hinge cover and pull the wires out of the hinge cover. Hingecover Grommet Be careful not to damage the electrical wires when removing the hinge cover. setting up _13 CAUTION setting up your freezer REVERSiNg THE FREEZER DOOR 12. Use wrench to separate the hinge shaft and then flip the hinge and reattach the hinge shaft. 13. Reassemble the hinge on the freezer door by reversing the step 11. Make sure to use right side hinge cover (which can be found underneath the removed plastic cover from step 2) and remove the grommet. After reassembling the hinge, wire and the hinge cover, switch the side from left to the right. Grommet 14. After switching the hinge, make sure to take out the right side wire cover, and close it with the wire cover on the top of freezer door. "Cover Wire Door R" can be found in the packaging 15. Take off the handle cover and remove the screws, make sure to detach the caps and the handle from the right to left side of the door. [. . . ] · Is the back of the appliance too close to the wall?· Have any foreign objects fallen behind or under the appliance?· Is the noise coming from the compressor in the appliance?· A ticking sound may be heard inside the appliance; this is normal. [. . . ]