User manual SAMSUNG SYNCMASTER S22C450MW

[. . . ] No user serviceable parts inside. · · This may cause an electric shock or a fire. Refer servicing to qualified service personnel. · If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. · This may cause an electric shock or a fire. · Do not place any heavy objects on the monitor. · This may cause an electric shock or a fire. · For each hour of looking at the monitor, you should let your eyes rest for 5 minutes. · This will reduce eye fatigue. · Do not use or store inflammable substances near the monitor. · This may cause an explosion or fire. User's Manual 10 Safety Instructions Other · Do not try to move the monitor by pulling on the wire or the signal cable. · This may cause a breakdown, electric shock or a fire due to damage to the cable. · Do not move the monitor right or left by pulling only the wire or the signal cable. · This may cause a breakdown, electric shock or a fire due to damage to the cable. · Never insert anything metallic into the monitor openings. · This may cause an electric shock, fire or injury. · Keep the monitor away from any magnetic substances. · This may cause discoloring or distortion of the image. User's Manual 11 Introduction Unparking · Monitor and Stand · Power Cord · Signal Cable · Quick Setup Guide · Pivot Stand and S/W CD (Option-SyncMaster 171B/181B) · Warranty Card (Not available in all locations) · Please make sure the following items attached. ) (Some models include a stand are included with your monitor. the following items are Please make sureIf any items are missing, contact your dealer. [. . . ] Check List Is the frequency properly adjusted when checking the Display Timing on the menu? Solutions Adjust the frequency properly by referring to the video card manual and the Preset Display Modes. (The maximum frequency per resolution may differ from product to product. ) There are only 16 colors shown on the screen. The screen colors have changed after changing the video card. There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found". Have the Windows colors been set properly? For Windows 98(95): Set the colors properly at the Control Panel, Display, Settings. For Windows 3. 1: Adjust the colors of the screen using the VGA utility provided by the video card. Set the video card by referring to the video card manual. Install the monitor driver according to the Driver Installation Instructions. Install the monitor driver according to the Driver Installation Instructions. Has the video card been set properly?See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. User's Manual 38 Troubleshooting Check List Check the following items if there is trouble with the monitor. 1. Check if the power cord and the cable are properly connected to the computer. Check if the computer beeps more than 3 times when booting. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor. Useful Tips . A monitor recreates visual signals received from the PC. Therefore, if there is trouble with the PC or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact a service center or your dealer. Judging the monitor's working condition If there is no image on the screen or an "Video mode not supported" message comes up, disconnect the cable from the computer while the monitor is still powered on. If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition. In this case, check the computer for trouble. . User's Manual 42 Specifications General General Model Name SyncMaster 171B LCD Panel Size Display area Pixel Pitch Type Viewing Angle 17. 0 inch diagonal 337. 92 (H) x 270. 336 (V) 0. 264 (H) x 0. 264 (V) a-si TFT active matrix 85/85/85/85(L/R/U/D), Typical Synchronization Horizontal Vertical 30 ~ 81 kHz 56 ~ 85 Hz Display Color 16. 7M (True) Resolution Optimum resolution Maximum resolution 1280 x 1024@60Hz 1280 x 1024@76Hz Input Signal, Terminated RGB Analog 0. 7 Vpp positive at 75 ohms Separate H/V sync, Composite, SOG TTL level positive or negative Maximum Pixel Clock 135 MHz Power Supply AC 90 ~ 264 VAC rms, 60/50 Hz ± 3Hz Signal Cable 15pin-to-15pin D-sub cable, detachable User's Manual 43 Specifications General Power Consumption 40W (Maximum) Dimensions (WxDxH) / Weight 444. 0 X 208. 4 X 457. 0 mm / 5. 4kg (With Simple Stand) VESA Mounting Interface 100mm x 100mm (for use with Specialty(Arm) Mounting hardware. ) Environmental considerations Operating Storage Temperature: 50°F ~ 104°F(10°C ~ 40°C) Humidity: 10% ~ 80%, non-condensing Temperature: -4°F ~113°F (-20°C ~ 45°C) Humidity: 5% ~ 95%, non-condensing Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99. 999% above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. of TFT LCD pixels that is contained in this product are 3, 932, 160. Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings Note : Design and specifications are subject to change without prior notice. User's Manual 44 Specifications General General Model Name SyncMaster SYNCMASTER S22C450MW LCD Panel Size Display area Pixel Pitch Type Viewing Angle 17. 0 inch diagonal 337. 92 (H) x 270. 336 (V) 0. 264 (H) x 0. 264 (V) a-si TFT active matrix 75/75/65/60(L/R/T/B), Typical Synchronization Horizontal Vertical 30 ~ 81 kHz 56 ~ 76 Hz Display Color 16. 7M (True) Resolution Optimum resolution Maximum resolution 1280 x 1024@60Hz 1280 x 1024@76Hz Input Signal, Terminated RGB Analog 0. 7 Vpp positive at 75 ohms Separate H/V sync, Composite, SOG TTL level positive or negative Maximum Pixel Clock 135 MHz Power Supply AC 90 ~ 264 VAC rms, 60/50 Hz ± 3Hz Signal Cable 15pin-to-15pin D-sub cable, detachable User's Manual 45 Specifications General Power Consumption 40W (Maximum) Dimensions (WxDxH) / Weight 444. 0 X 208. 4 X 457. 0 mm / 5. 4kg (With Simple Stand) VESA Mounting Interface 100mm x 100mm (for use with Specialty(Arm) Mounting hardware. ) Environmental considerations Operating Storage Temperature: 50°F ~ 104°F(10°C ~ 40°C) Humidity: 10% ~ 80%, non-condensing Temperature: -4°F ~113°F (-20°C ~ 45°C) Humidity: 5% ~ 95%, non-condensing Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99. 999% above is used for this product. [. . . ] If in doubt, consult the technical services department or your local representative. Temperature Range of -40°C to +70°C Relative Humidity of 10 -95%, non-condensing Transport and Storage Limitations: User's Manual 63 Information Natural Color · Natural Color Software Program One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). [. . . ]