User manual SAMSUNG SYNCMASTER S23C200B

[. . . ] The Samsung logo and SyncMaster are registered trademarks of Samsung Electronics Co. , Ltd. ; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR name and logo are registered trademarks of the U. S. As an ENERGY STAR Partner, Samsung Electronics Co. , Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners. 2_1100pETOC. fm Page 1 Friday, February 23, 2001 3:59 PM Safety Instructions . [. . . ] Push the button to open the Pincushion/Trapezoid adjustment screen. Use the button or button to adjust the pincushion setting; use the button or button to adjust the trapezoid setting. 20 35 : Previous Menu 13 English 6_1100pE8p23p. fm Page 14 Friday, February 23, 2001 4:06 PM Adjusting Your Monitor Pinbalance RGB Geometry Parallel/Rotation Pincushion/Trapezoid Pinbalance Linearity Adjust the pinbalance setting when the sides of the display are bowed towards the left or right. 1 2 3 With the menu off, push the button. Push the button or button until the "Geometry" screen is displayed. button to select : Access Function Pinbalance Push the button to open the Pinbalance adjustment screen. button to adjust the 53 : Previous Menu 4 Linearity RGB Geometry Parallel/Rotation Pincushion/Trapezoid Pinbalance Linearity Adjust the linearity setting when the display image is compressed at the left, right or top, bottom. 1 2 3 With the menu off, push the button. Push the button or button until the "Geometry" screen is displayed. button to select : Access Function Linearity Push the button to open the Linearity adjustment screen. button to adjust the 44 : Previous Menu 4 14 6_1100pE8p23p. fm Page 15 Friday, February 23, 2001 4:06 PM Adjusting Your Monitor Color RGB Color Color1 Color2 Color3 Color temperature is a measure of the "warmth" of the image colors. The available range is between 5000 to 9300K. Follow these steps to change the color temperature and adjust individual R, G, B color control. : Access Function Color1 1 50 50 50 With the menu off, push the button. Push the button or button until the "Color" screen is displayed. The degaussing screen will appear. : Previous Menu NOTE: The monitor may buzz momentarily, the image colors may change and the image will jiggle for a few seconds. These effects are normal. 4 After a few seconds, the degauss main menu will return. 17 English 6_1100pE8p23p. fm Page 18 Friday, February 23, 2001 4:06 PM Adjusting Your Monitor Recall RGB Advanced Degauss Recall +++ Sync. Input Type G Video Input Level D-SUB/BNC : Access Function Recall Use the recall feature to reset these monitor settings to their original levels: Position, Size, Pincushion, Trapezoid, Parallelogram, Pinbalance, Rotation, and Clear Moire. 1 2 3 4 With the menu off, push the button. Push the button or button until the "Advanced" screen is displayed. button or button to select YES NO Push the button to open the recall selection screen. If you don't want to reset the monitor, use the button to select NO. :Previous Menu NOTE: If you have selected "YES", all settings listed above will be reset. All other settings will remain the same. CAUTION: This operation resets all of the data in the user memory area for the current timing signal. User-Delete Push and hold EXIT ( seconds. ) button for at least 5 CAUTION: This operation resets all of the data in the user memory area. If this occurs, you must remake your user adjustmensts. 18 6_1100pE8p23p. fm Page 19 Friday, February 23, 2001 4:06 PM Adjusting Your Monitor Sync. Input Type RGB Advanced Degauss Recall +++ Sync. [. . . ] n Increase the separation between the equipment and receiver. n Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. n Consult the dealer or an experienced radio/TV technician for help. The party responsible for product compliance: SAMSUNG ELECTRONICS CO. , LTD America QA Lab of Samsung 85 West Tasman Drive San Jose, CA 95134 USA Tel) 408-544-5124 Fax) 408-544-5191 Provided with this monitor is a detachable power supply cord with IEC320 style terminations. [. . . ]