User manual SAMSUNG SYNCMASTER S24B420BW

[. . . ] The Samsung logo and SyncMaster are registered trademarks of Samsung Electronics Co. , Ltd. ; Microsoft, Windows ® and Windows® NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR name and logo are registered trademarks of the U. S. As an ENERGY STAR Partner, Samsung Electronics Co. , Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners. Table of Contents Safety Instructions. [. . . ] Use "­ " and "+" buttons to set the corresponding values to remove or minimize horizontal and vertical noise shown in Figure A and Figure B respectively. Figure A Figure B Image Lock n n Fine Coarse SOURCE VIDEO PC PIP AUTO EXIT MENU SOURCE VIDEO PC PIP AUTO EXIT MENU English 12 Adjusting Your LCD Monitor Table 1. Screen controls (Continued ) Icon n n Menus and Sub-menus Function Descriptions ­ + Fine Coarse H-Position V-Position Color control The tone of color can be changed from bluish white to redish white. The individual color components are also user customizable. Color parameters are replaced with the factory default values. n n n n n Mode 1 Mode 2 Mode 3 User Mode Reset English 13 Portuguese Italiano Español Changes the location of the image. In case of the image is off center, use this function to center the image. n H-Position "­" : Move to the LEFT "+" : Move to the RIGHT n V-Position "­" : Move to the Bottom "+" : Move to the Top n n Deutsch Although "Auto Adjustment" automatically finds the optimum values of FINE and COARSE parameters as well as image position, it may be necessary for you to adjust those parameters manually. It is recommended for you to use "Auto Adjustment" first. If the adjustment results are not satisfactory, then use COARSE and FINE adjustment features to get the best adjustment results. Bear in mind that COARSE and FINE adjustments may change the width of the image and affect image position as well. If the image is clear while out of center by a couple of pixels, use image position to center the image. Français English Adjusting Your LCD Monitor Table 1. Screen controls (Continued ) Icon Menus and Sub-menus PIP(Picture-inPicture) n n Function Descriptions ­ + n n n Shows a small sub-window superimposed on Video or PC. (Refer to page 9. ) When Video is a full screen video source, then PC will be appeared in a small window. Likewise, when PC is a full screen video source, then Video will be appeared in a small window. The monitor remembers the previous state of Video and PC. Thus if the previous state of PC was S-Video, and currently PC video is displayed in full screen, then S-Video will appear in the PIP window. When powered on, PIP source is from DVI and Video is from S-Video. If your PC connects Analog or Video connects RCA, change source like below method. When you touch SOURCE button when PIP feature is active, PIP source will be changed from RCA or S-Video to S-Video or RCA respectively, and from D-Sub or DVI to DVI or D-Sub respectively. n Size Off: Disables PIP 1: 400 x 300 2: 640 x 480 3: 800 x 600 n n n Position H-Position Changes PIP window position to the horizontal direction. V-Position Changes PIP window position to the vertical direction. English 16 Adjusting Your LCD Monitor Table 1. Screen controls (Continued ) Icon Menus and Sub-menus PBP (Picture by picture) n n Function Descriptions ­ + n Shows PC and Video side by side. The monitor screen splits by half and one side is filled with PC and the other side is filed with Video. [. . . ] n Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. n Consult the dealer or an experienced radio/TV technician for help. device must accept any interference received, including interference that may cause undesired operation. The party responsible for product compliance: SAMSUNG ELECTRONICS CO. , LTD America QA Lab of Samsung 85 West Tasman Drive San Jose, CA 95134 USA Tel) 408-544-5124 Fax) 408-544-5191 Provided with this monitor is a detachable power supply cord with IEC320 style terminations. [. . . ]