User manual SAMSUNG SYNCMASTER S24C230BL

[. . . ] TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99. 999% above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. of TFT LCD pixels that is contained in this product are 2, 359, 296 (15"), 3, 932, 160 (17"). [. . . ] Image lock and position parameters are replaced with the factory default values. H-Position SyncMaster 150MP PC V1 V2 TV PC V1 V2 TV SyncMaster 150MP Source PIP Exit Menu CH VOL Source PIP Exit Menu CH VOL V-Position SyncMaster 150MP PC V1 V2 TV Source PIP Exit Menu CH VOL PC V1 V2 TV SyncMaster 150MP Source PIP Exit Menu CH VOL English 13 4_E150MP170MPbody. fm Page 14 Wednesday, September 19, 2001 2:54 PM Adjusting Your LCD Monitor Table 1. Screen controls (Continued) Icon Menus and Sub-menus Function Descriptions Color The tone of color can be changed from redish white to bluish white. The individual color components are also user customizable. Color parameters are replaced with the factory default values. When external A/V devices such as VCR, DVD or RF(TV)cable are connected to the monitor, PIP allows you to watch video from such devices in a small window super-imposed on pc video signal. The channel system can be set in several different ways. Select a channel system that is being used in your region. (See "PAL broadcasting systems" on page 29) CCIR AUSTRALIA Upon selecting a channel system, you will be asked if you want to perform "Channel auto program ". Select "OK " to perform the "Channel auto program " or select "Cancel" to select different channel system. I I I I I Mode1 Mode2 Mode3 User Mode Reset PIP(Picture-inPicture) I I Size Position TV Setup I *Channel system * According to our R&D Lab test result, "Channel auto program" usually takes around 8 minutes to scan 70 channels. The scanning can be longer or shorter depending on the number of channels . English 14 4_E150MP170MPbody. fm Page 15 Wednesday, September 19, 2001 2:54 PM Adjusting Your LCD Monitor Table 1. Screen controls (Continued) Icon I Menus and Sub-menus Function Descriptions Manual Tune Due to the weak signals or a wrong antenna configuration, some of the channels may not be tuned correctly or there could be a mismatch of the channel number between a Real channel and a Program channel. The audio circuit processes audio signal from various external input sources such as DVD, VCR, TV or PC. Selects a sound source from PC, DVD, VCR or TV. NOTE: Mute is released when you change channel, adjust volume, activate PIP or access MTS menu via either the monitor or the remote controller. I I I I Source Select Bass Treble Speaker mute Image Size Expand1 The size of the image being displayed can be handled in several different ways. Resize the image to fill the whole screen. (applicable to PC RGB only : 150MP) (applicable to both PC RGB and video : 170MP) Expand images keeping the original aspect ratio. (applicable to PC RGB only : 150MP) (applicable to both PC RGB and video : 170MP) Display the incoming image as it is. (applicable to PC RGB only : 150MP) (applicable to both PC RGB and video : 170MP) The image can be magnified up to 64 times larger than the original image. Move the zoomed image horizontally and vertically. I I Expand2 I Normal I Zoom I Pan English 17 4_E150MP170MPbody. fm Page 18 Wednesday, September 19, 2001 2:54 PM Adjusting Your LCD Monitor Table 1. Screen controls (Continued) Icon Menus and Sub-menus Function Descriptions Image Effect Image being displayed can be made softer or sharper. · Sharpen more · Sharpen · Medium · Soften · Soften more The monitor system will turn off automatically if one of three time intervals is selected. OSD language and appearence can be changed. [. . . ] I Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. I Consult the dealer or an experienced radio/TV technician for help. IC Compliance Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations of ICES-003. Cet appareil Numérique de classe B respecte toutes les exigences du Règlemont ICES-003 sur les équipements produisant des interférences au Canada. User Information Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. If necessary, consult your dealer or an experienced radio/ television technician for additional suggestions. [. . . ]