User manual SAMSUNG SAMUSNG I100

[. . . ] Instructions Use this camera in the following order. Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p. 20) Getting to know your camera Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read this user manual thoroughly. [. . . ] Change the brightness by pressing the Left/Right button. Press the OK button and the image will be saved as a new file name. Saturation control You can change the saturation of the image. 1. Select ( ) by pressing the Up/Down button and a bar for selecting the saturation will be displayed. Change the saturation by pressing the Left/Right button. Press the OK button and the image will be saved as a new file name. Contrast control You can change the contrast of the image. 1. Select ( ) by pressing the Up/Down button and a bar for selecting the contrast will be displayed. Change the contrast by pressing the Left/Right button. Press the OK button and the image will be saved as a new file name. Noise effect You can add noise to an image to add a more classic feel to your photo. The image adjusted with noise effect is saved as 5M image size. 1. Select ( ) by pressing the Up/Down button and press the OK button. The [Processing!] message appears and the image is saved as a new file name. 068 E (Effect) button: FUN If the image size is ( ) or ( ), the FUN menu cannot be selected. Cartoon You can add a text box to the image to make the image cartoon like. The cartoon image is saved as 1M image size. Select Cartoon ). ( Select a desired frame by pressing the Left/Right button and then press the OK button. Select a desired position by pressing the Up/ Down/Left/Right button and press the OK button. 100-0006 Press the OK button and the image is saved. Press the OK button again to open a new image to save. Change the location of the text box by pressing the Left/ Right button. 100-0020 Select an image by pressing the Up/Down/Left/Right button and press the OK button. Select the third image with the same procedure. Select the position of image and text box with the same procedure. Press the OK button and the file is saved as a new file name. 069 E (Effect) button: FUN Changing the cartoon image before taking the last shot Before saving the cartoon image, you can change the selected image. Pressing the Fn button deletes the images in order. Press the OK button and you can select images. Photo Frame You can add 9 types of frame-like borders to a still image you want to capture. Date & Time information will not be printed on the stored image taken with Photo Frame menu. Pressing the Fn button Select Photo Frame( ). Select ( ) by pressing the Up/Down button and press the OK button. 3. After selecting desired images, press the OK button to save the image as a new file name. 070 E (Effect) button: FUN Preset focus frames You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. The High Light image is saved as under 5M image size. Select High Light ( ). Select a desired frame by pressing the Left/Right button and press the OK button. <Range 1> <Range 2> 2. Select a desired photo frame by pressing the Left/Right button and press the OK button to save the image. 100-0020 <Range 3> <Range 4> 071 E (Effect) button: FUN Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Select a focus frame by pressing the Left/Right button and press the OK button. [. . . ] The XviD codec is distributed according to the GNU General Public License and everyone can copy, distribute and change this codec. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. For more information, see the License documents (http://www. gnu. org/copyleft/gpl. html). When the DirectX 9. 0 or later is not installed Install the DirectX 9. 0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ USB Driver\DirectX 9. 0] folder and click the DXSETUP. exe file. Visit the following site for downloading the DirectX. http://www. microsoft. com/directx If a PC (Windows 98SE) stops responding while the camera and PC are connected repeatedly If a PC (Windows 98SE) is turned on for a long time and the camera is connected repeatedly, the PC may not recognise the camera. [. . . ]