User manual SAMSUNG SC-24AP6X

[. . . ] Indoor unit AS07P2GE SC07APG SC07ZP2 AS09P2GB AS09P2GE SC09APG SC09ZP2 AS12P4GB AS12P4GE SC12APG SC12ZP4 AS14P4GB AS18P0GBA AS18P0GEA SC18AP0 SC18ZP0B AS24P6GBA AS24P6GEA SC24AP6 SC24ZP6B Outdoor unit US07P2GE SC07APGX SC07ZP2X US09P2GB US09P2GE SC09APGX SC09ZP2X US12P4GB US12P4GE SC12APGX SC12ZP4X US14P4GB US18P0GBA US18P0GEA SC18AP0X SC18ZP0BX US24P6GBA US24P6GEA SC24AP6X SC24ZP6BX Split-type Room Air Conditioner (Cool) Aire acondicionado domstico sistema Split (Refrigeracin) Climatiseur de type Spar (Refroidissement) Condizionatore d'aria per ambienti ad unit Separate (Raffreddamento) Aparelho de ar condicionado tipo Split (Refrigerao) Geteilte raumklimaanlage (Khlen) IAIPOYMENO KIMATITMTIKO MATIOY (~) E S F I P D G DB98-16152A(1) EHNIKA DEUTSCH PORTUGUS ITALIANO FRANAIS ESPAOL OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D'UTILISATION ISTRUZIONI PER L'USO MANUAL DE INSTRUES GEBRAUCHSANWEISUNG TM TM ENGLISH Safety Precautions The following safety precautions must be taken when using your air conditioner. Disconnect all remote electric power supplies before servicing, installing or cleaning. This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Users of this product are cautioned not to attempt repair of this product at their own discretion. [. . . ] The air conditioner starts up in the mode selected when the unit was last used. The temperature and fan settings are adjusted automatically. The air conditioner cools the room as quickly as possible. After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings. But, if you press the button in DRY or FAN mode, it will change to AUTO mode automatically. 2 Press the Result: 3 If you wish to stop the Turbo function before the end of the 30-minute period, press the Result: button again. The air conditioner is reset automatically to the previous mode, temperature and fan settings. 4 To control the direction of the air flow, refer to pages 16 and 17. E-11 Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. 1 If necessary, press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. button. IMPORTANT 2 Select COOL mode by pressing the Note You can select the Energy saving mode only in the COOL mode. 3 Press the Result: button. The air conditioner runs in the Energy saving mode. The outer air flow blade moves up and down. To stop the Energy saving mode, press the button again. 4 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 26C and 30C inclusive. Note If you want to adjust temperature under 26C, cancel the Energy saving mode before adjusting the temperature. 5 To select the fan speed, press the until the required setting is displayed. button one or more times 6 To control the direction of the air flow, refer to pages 16 and 17. E-14 Generating Anion ENGLISH The air conditioner can generate anion with an ionizer in the indoor unit. Since it is an additional function, you can select it any mode, even when the air conditioner is turned off. Note If you press the button during off, the air conditioner will turn on automatically and generate anion in the Fan mode with Low fan speed. 2 If you wish to stop the Anion function, press the button again. Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings. 3 To control the direction of the air flow, refer to pages 16 and 17. E-15 Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the Result: button one or more times as required. Upwards. RECOMMENDATION 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the Result: button. The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the button again. Note If you switch the air conditioner. . . [. . . ] 18C to 43C approx. If the cooling operation is used at over 33C(indoor temperature), it does not cool at its full capacity. Operating Your Air Conditioner Without the Remote Control Your air conditioner can be operated directly from the indoor unit if the remote control is lost or broken. To switch the air conditioner on, press the On/Off switch on the right side of the indoor unit. Result: The Operation indicator on the indoor unit comes on. The air conditioner starts up in the most suitable mode for the room temperature: Room Temperature 21C or above 3 Operating Mode Cool Temperature Setting 24C approx. To switch the air conditioner off, press the On/Off switch again. [. . . ]