User manual SAMSUNG SC-6366

[. . . ] WATER AND MOISTURE: Do not use this CAMCORDER near water; for example, near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool or lake. ACCESSORIES: Do not place this CAMCORDER on an unstable cart, stand, tripod, bracket or table. The CAMCORDER may fall, causing serious injury to a child or adult, and serious damage to the unit. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the CAMCORDER. [. . . ] 1 EIS(Electronic Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the camcorder (within reasonable limits). 1 It provides more stable pictures when: s Recording a small object close-up s Recording and walking at the same time s Recording through the window of a vehicle 1. Turn the MENU DIAL highlight to CAMERA and press the ENTER button. Turn the MENU DIAL to activate the EIS function, press the ENTER button. s If you do not want to use the EIS function, set the EIS menu to OFF. Notes s CAM MODE INITIAL CAMERA A/V MEMORY VIEWER PROGRAM AE WHT. BALANCE D. ZOOM EIS DSE SELECT FLASH SELECT CUSTOM CAM MODE CAMERA SET PROGRAM AE WHT. ZOOM EIS DSE SELECT CUSTOM It is recommended that you deactivate the shake compensation function when using a tripod. 47 ENGLISH Advanced Recording q DSE(Digital Special Effects) SELECT 1 1 1 1 The DSE function works in CAMERA and M. REC mode only. The digital effects enable you to give a creative look to your recording by adding various special effects. Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. ART mode This mode gives the images a coarse effect. BALANCE D. ZOOM EIS DSE SELECT FLASH SELECT CUSTOM 50 ENGLISH Advanced Recording q CUSTOM. Q 1 You can customize settings and save them for future use. s The CUSTOM. Q function operates in the CAMERA and M. REC mode. 1 If you want to use the CUSTOM. Q function (see page 61) correctly, set the status of each item as desired before using the CUSTOM. Q function. 1 You can set and store the following items: s PROGRAM AE, WHT. BALANCE, D. ZOOM, EIS, DSE SELECT 1. Turn the MENU DIAL, select CAMERA position and press the ENTER button. Select CUSTOM. Q using MENU DIAL in the submenu and press the ENTER button. Using the MENU DIAL and press the ENTER button, set the status of each item as desired. To exit the menu, press the MENU button. Notes s s CAM MODE CAMERA SET PROGRAM AE WHT BALANCE D ZOOM EIS DSE SELECT CUSTOM CAM MODE INITIAL CAMERA A/V MEMORY VIEWER PROGRAM AE WHT. BALANCE D. ZOOM EIS DSE SELECT FLASH SELECT CUSTOM If you want to activate the CUSTOM. Q function, press the CUSTOM. Q button while in CAMERA mode. The PROGRAM AE mode is automatically setup when the EXPOSURE is set on manual. CAM MODE CAMERA SET CUSTOM PROGRAM AE WHT. [. . . ] 78 -FFade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FLASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame advance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]