User manual SAMSUNG SC-6630

[. . . ] WARNING: Do not use the vacuum cleaner when rug or floor is wet. Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to be used as a toy. [. . . ] If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Don't carry the vacuum cleaner by holding the hose. Use the handle on the vacuum cleaner set. 1 1 ASSEMBLING THE CLEANER OPTION Features may vary according to model. CAUTION Please do not press the button of dust bin handle when carrying machine. For storage, park the floor nozzle. 2 2 OPERATING THE CLEANER 2-1 POWER CORD NOTE When removing the plug from the electrical outlet, grasp the plug, not the cord. 2-2 POWER CONTROL (INFRARED CONTROL) - HOSE 1. Vacuum cleaner ON/OFF Press the ON/OFF button to operate the vacuum cleaner. Vacuum cleaner MODE (MIN/MID, MAX) Press the MODE button repeatedly to select the correct mode. (ON) MIN MID MAX SENDER HANDLE CONTROL [The cleaner is controlled by using infrared signals. ] - BODY Press the power control button repeatedly to select the correct mode. (ON(MAX) OFF) NOTE : If the remote handle control is not working, the cleaner can be operated using the control button on the body of the machine. The filter light is illuminated when the dust pack requires checking or emptying. The IR light indicates the part that receives the infra-red signal from the handle control. 3 2-3 HOW TO USE AND MAINTAIN THE ACCESSORIES Features may vary according to model. PIPE Adjust the length of the telescopic pipe by sliding the length control button locat- To check for blockages, separate the teleed in the center of the telescopic pipe scopic pipe and adjust to shorten. for easier removal of waste clogging the tube. ACCESSORY Push the accessory on to the end of the hose handle. Pull out and turn the dusting brush for cleaning delicate areas. To use the upholstery tool, push the accessory on to the end of the hose handle in the opposite direction. OPTION - Carpet Cleaning - Floor Cleaning Adjust the inlet lever according to the floor surface. Remove waste matter completely if the inlet is blocked. 4 OPTION Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. In this case, clean the drum with care. 1 2 3 Remove waste matter Remove the brushbar such as dust and hair Push the Open button of from the transparent tangled around the the transparent screen brushbar using scissors. For improved pickup of pet hair and fibre on carpets 4 5 6 Remove dust inside the brush housing using a dry duster or crevice tool. Insert brushbar into rotating belt and assemble. Click the transparent screen cover back into place to reassemble. OPTION Clogs on turbine keeps brush from turning, and in this case, take care of it. Turbine Brush To reassemble, align the cover to the Remove waste front of the main body and close. [. . . ] Nozzle, suction hose or tube is blocked. Check that the cord is not twisted or wound unevenly. Pull the cord out 2-3m and push the cord rewind button. [. . . ]