User manual SAMSUNG SC-8315

[. . . ] WARNING: Do not use the vacuum cleaner when rug or floor is wet. This appliance is not intended for use by young persons or infirm persons without supervision unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. [. . . ] If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. The vacuum cleaner is provided with a self-resetting thermal cut-out which automatically shuts off on over-heating. Overheating can be caused by blockage in the filter, nozzle, tube or hose. After removing the cause and allowing the motor to cool, the vacuum cleaner will automatically restart. 2 1 ASSEMBLING THE CLEANER OPTION OPTION Features may vary according to model. For storage, park the floor nozzle. 3 2 OPERATING THE CLEANER 2-1 POWER CORD 2-2 ON/OFF SWITCH NOTE When removing the plug from the electrical outlet, grasp the plug, not the cord. 2-3 UV STERILIZATION LAMP(OPTIONAL) The UV light is effective to kill bacteria in the dust chamber's filter, and when pushed the "ON/OFF" switch button, the UV lamp is turned on automatically and keeps performing the bacteria killing operation as long as the light remains on. Besides, although it is stopped when the UV lamp is turned on it continues killing bacteria in the dust chamber's filter. UV STERILIZATION LAMP NOTE : Do not stare for a long time the UV STERILIZATION LAMP directly as can be harmful in eyes. 2-4 AIR CONTROL To reduce suction for cleaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open. 4 2-5 POWER CONTROL 1) BODY-CONTROL TYPE MIN = For delicate surface e. g. MAX = For hard floors and heavily soiled carpets. 2) REMOTE-CONTROL TYPE (INFRARED-CONTROL) SENDER SENDER RECEIVER CONTROL BUTTON HANDLE CONTROL Press Power Control button repeatedly to select correct mode. (STOP MIN MID MAX STOP) NOTE : 1. When using the control button for suction power, make sure that the transmitter of the remote controller not be blocked by your body. When operating the cleaner in a room with a high ceiling or under intensive light, the suction power controlling button may not work properly. So, use the "Power Control" button on the main body 3. [. . . ] Pull the cord out 2-3m and push down the cord rewind button. Please check filter and, if required, clean as illustrated in the instructions. Vacuum cleaner does not pick up dirt. [. . . ]