User manual SAMSUNG SCC-131BP

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance. WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFEGUARDS ii iii User Guide User Guide 7. Slots and openings in the cabinet on the back or bottom are provided for ventilation, to insure reliable operation of the appliance, and to protect from overheating. These openings should never be blocked by placing the appliance on a bed, sofa, rug or other similar surfaces. This appliance should never be placed near or over a radiator or heat register. [. . . ] 6 Mounting Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Setting Lens Selection Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Adjusting Back Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Connecting Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . . 14 Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Function Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction Adopting the latest Super -HAD CCD, these cameras provide the best monitoring function when they are connected to CCTV system. In the mechanical fluorescent light environment, if you attach MANUAL IRIS and turn the ELC switch among FUNCTION switches on, color may be rolled. In this case, supply AC power before you turn L/L switch among FUNCTION switches on. (NTSC:60HZ , PAL:50HZ) E COLOR ROLLING is the problem that color on the monitor screen changes non-periodically. This happens when White Balance is not fixed, because a mechanical fluorescent light flickers when it's cycle is the same to the cycle of the power frequency. 2 3 User Guide User Guide 2. Features High Sensitivity Adopting the 1/3" Super HAD CCD that has the latest builtin microchip lens, the high sensitivity is realized. 3. Installation Precautions in Installation and Use Do not attempt to disassemble the camera yourself. Be cautious to avoid damage on the camera caused by improper storage or operation. Do not expose this camera to rain or moisture. Do not operate this camera on a wet place. Do not use strong or abrasive detergents when cleaning the camera body. Keep the camera at a cool place away from the direct sunlight. Leaving it under the direct sunlight may result in the malfunction of the unit. Excellent Back Light Compensation Even when an intense light source or sunlight is in the back of your subject, a clear image will be provided due to the ideal combination of the excellent performance of the high light compression (KNEE Compensation) function and the BLC (Back Light Compensation) function. E Digital Line-lock The control and reliability have been enhanced due to the Full Digital Line Lock, which allows users to adjust the Line Sync Phase. Resolution High resolution is realized due to the Full Digital Image Processing by the DSP for monitoring camera. 4 5 User Guide User Guide Connecting Auto Iris Lens Connector Prepare the following Auto Iris Lens Connector supplied with the camera. Rib Pin3 Pin1 Pin4 Pin2 Mounting the Lens Loosen a screw fixing the Flange Back Adjustment Ring by turning it counterclockwise and turn the Adjustment Ring to the "C" direction (counterclockwise) until it stops. [. . . ] When set to ON, it operates in the Power Sync mode. In that case, input AC power source to the camera and select SW1 "ON". (NTSC : 60HZ, PAL : 50HZ) 18 19 User Guide User Guide DC Iris Level Control When the ALC Lens Selection Switch is set to DC, adjust this Iris Level Control using an adjustment rod such as a screwdriver. 5. Product Specifications SCC-130B/131B Item Product Type Broadcasting System CCD No. [. . . ]