User manual SAMSUNG SCC-643D

[. . . ] Combi Dome Camera SCC-643(P) Owner's Instructions Part : AB68-00321A Printed in Korea Safety Precautions The purpose of this information is to ensure proper use of this product to prevent danger or damage to property. Please be sure to observe all precautions. * The precautions are divided into "Warnings" and "Cautions" as distinguished below: Warning: Ignoring this warning may result in death or serious injury. Caution: Ignoring this caution may result in injury or damage to property. 6. [. . . ] You can use the PHASE menu of the LINE LOCK submenu to assign as much PHASE as you want. (CAMERA SET) CAMERA ID V-SYNC COLOR/BW ZOOM SPEED MOTION DET OFF LINE. . . 3 OFF (LINE LOCK) Press [Enter] BURST LEVEL DWELL TIME RET ON MEDIUM S--|----L EXIT QUIT Press [Enter] PHASE ( 000) RET ----I ---- Caution : If you use an infrared light source while in AUTO mode, AUTO switching malfunction and camera AF malfunction may occur. EXIT QUIT 3-4 3-5 ZOOM SPEED In the ZOOM SPEED menu you can select the speed of the ZOOM Key (Tele/Wide). Use the [Left] or [Right] keys in the ZOOM SPEED menu to select the speed. (CAMERA SET) CAMERA ID V-SYNC COLOR/BW ZOOM SPEED MOTION DET OFF INT AUTO. . . 3 OFF If you press [ENTER] once more, you will exit the "AREA" setting menu. Use the "SENSITIVITY" menu to set the sensitivity of the MOTION Detection. The Higher it is set, the more sensitive the Motion Detection moves. EXIT QUIT Use the [Left, Right, Up, Down] Keys Press the [5] key to assign an area or to cancel the area. 1 : Magnification x 22 takes about 18 seconds. Slowest speed 2 : Magnification x 22 takes about 10 seconds. Low speed 3 : Magnification x 22 takes about 6 seconds. High speed 4 : Magnification x 22 takes about 4 seconds. Fastest speed MOTION DET In MOTION DET, you can set the Motion Detection function, Motion Detection Sensitivity, and the Area of Motion Detection. If the Motion Detection function is set, the movement of an intruder can be detected. When motion is detected, it sets off the Alarm signal of the Controller. (CAMERA SET) CAMERA ID V-SYNC COLOR/BW ZOOM SPEED MOTION DET OFF INT AUTO. . . (MOTION DET) *Motion Detection function does not operate while handling slow SHUTTER, PRESET, SCAN, AUTO MODE(AUTO PAN, PATTERN) or MANUAL KEY (JOYSTICK, ZOOM, FOCUS, IRIS). EXIT The EXIT menu is used to quit the CAMERA SET menu of the SCC-643(P) and return to the MAIN MENU. - QUIT: Ignores the changed information and restores the saved information. - SAVE: Saves the information of the setting condition of the menu. - PRESET: Ignores the changed information and restores the initial factory defaults of the menu. (CAMERA SET) CAMERA ID V-SYNC COLOR/BW ZOOM SPEED MOTION DET OFF INT AUTO. . . 3 OFF Press [Enter] EXIT QUIT AREA SENSITIVITY RET PRESET. . . MEDIUM EXIT QUIT If you select ON and press the [ENTER] key, the "MOTION DET" submenu screen will come up. The "AREA" menu, from which you can specify screen areas where the Motion Detection function will be applied, can be set to either PRESET or USER. If you set the "AREA" menu to PRESET, the Motion Detection function will be applied to the areas preset as factory defaults. If you set the AREA menu to USER and press the [ENTER] key, you can choose from 48 areas where you want to apply the Motion Detection function. Use the [5] key and [left, right, up, down] keys to move and select the motion detection area. Press the [5] key to assign an area or to cancel the area. 2. VIDEO SET MENU IRIS The video output level of the monitor can be controlled by the IRIS lens depending on the level of the incoming light. The video output level can be set in the ALC menu. The opening and shutting of the Iris lens can be set manually in the MANU menu. 3-7 3-6 ALC Choose the ALC of the IRIS item and press [ENTER] and set he submenu to the Video Output level and BLC will be shown. The Video Output Level can be set in the level item using the [Left, Right] keys. MANU If the IRIS item is set to MANU, the sub screen to open and shut the Iris manually will be shown. [. . . ] ENGLISH EXIT QUIT HOME RETURN HOME POSITION AUTO FLIP PRIVACY ZONE CAM RESET. . . OTHER SET. . . Press [Enter] HOME RETURN HOME POSITION AUTO FLIP PRIVACY ZONE CAM RESET. . . LANGUAGE EXIT [Enter] KEY 1* 5 2 6 3 7 4 8 [Enter] KEY QUIT RET SET UP TIME FOR HOME RETURN: OFF: HOME RETURN function cancellation OFF © 1 MIN © 2 MIN © 3 MIN ~ 60MIN © ~12HOUR Select PRIVACY ZONE and press the [Enter] key. The PRIVACY ZONE Map appears and an asterisk "*" is placed next to the numbers set. [. . . ]