User manual SAMSUNG SCC-C4307P

[. . . ] Notes regarding the battery pack - Make sure that the battery pack is fully charged before starting to record. - To preserve battery power, keep your camcorder turned off when you are not operating it. - If your camcorder is in CAMERA mode, and it is left in STBY mode without being operated for more than 5 minutes with a tape installed, it will automatically turn itself off to protect against unnecessary battery discharge. - Make sure that the battery pack is fitted firmly into place. [. . . ] Direct sunlight can damage the LCD monitor. Notes regarding the hand strap - To ensure a steady picture during filming, check that the hand strap is properly adjusted. - Do not force your hand into the hand strap as you could damage it. 3 Getting to Know Your Camcorder Front & Left View 1. Remote sensor (VP-D103(i)/D105(i) only) 4. Video Light (VP-D103(i)/D105(i) only) 2. Remote sensor (VP-D103(i)/D105(i) only) 4. Video Light (VP-D103(i)/D105(i) only) 5. IR(Infrared) Light Accessories Supplied with camcorder Make sure that the following basic accessories are supplied with your digital video camera. 1. AUDIO/VIDEO Cable Basic Accessories Lithium Ion Battery pack AC Power Adapter (AA-E8 TYPE) AC Cord AUDIO/VIDEO Cable Instruction Book Lithium battery for Remote Control or Clock. Remote Control (VP-D103(i)/D105(i) only) 8. USB cable (VP-D102D(i)/D103(i)/D105(i) only) 9. I The yellow plug : Video I The white plug : Audio(L)-mono I The red plug : Audio(R) - STEREO only - If you connect to a monaural TV or VCR, connect the yellow plug (Video) to the video input of the TV or VCR and the white plug (Audio L) to the audio input of the TV or VCR. You may use the SCART adapter (optional). Set the power switch on the camcorder to PLAYER mode. Turn on the TV and set the TV/VIDEO selector on the TV to VIDEO. I Refer to the TV or VCR user's manual. Notes I I I Connecting to a TV which has no Audio and Video input jacks You can connect your camcorder to a TV through a VCR. Connect the camcorder and VCR with the AUDIO/VIDEO cable. I The yellow plug : Video I The white plug : Audio(L) - Mono I The red plug : Audio(R) 2. Connect a TV to the VCR. S-VIDEO VCR VIDEO AUDIO(L) AUDIO(R) USB DV AUDIO /VIDEO Audio/Video S-VIDEO TV S-VIDEO MIC ANTENNA CAMCORDER 3. Set the power switch on the camcorder to PLAYER mode. I Set the input selector on the VCR to LINE. [. . . ] To stop recording, press the START/STOP button again. 2 3 Maintenance Cleaning and Maintaining the Camcorder Cleaning the Video Heads To ensure normal recording and clear pictures, clean the video heads when the playback pictures display square block-shaped noise or distortion, or a blue screen appears. (blue screen) 1. 4. Set the power switch to PLAYER mode. Press the (STOP) button after 10 seconds. [. . . ]