User manual SAMSUNG SC-D465B

[. . . ] Before operating the unit, please read this Instruction Book thoroughly, and retain it for future reference. Otherwise, there is a danger of overheating, fire or explosion. Samsung is not responsible for problems occurring due to using unapproved batteries. Over rotation may cause damage to the 1 inside of the hinge that connects the LCD screen to the Camcorder. [. . . ] (SC-D465(B) only) When there are no still images recorded on the tape , it will be fully rewound or forwarded. Photo image recording is not available while Color Nite or 16:9 Wide is in use. DIS, Digital Zoom, Color Nite or Digital Effect is not available when taking a photo image. Q, DIS or Digital Zoom mode is in use will release current mode. (After a photo image is taken, the mode will return automatically. Playing back a Tape you have recorded on the LCD Screen the Playback function works only in Player mode. You can monitor the playback picture on the LCD screen. The Camcorder stops automatically after rewinding is complete. You can view the picture you recorded on the LCD screen. You can adjust the LCD Bright/Color during playback. ) [ Notes ] You can also view the picture on a TV screen, after connecting the Camcorder to a TV or VCR. When you use the LCD screen for playback, you will hear recorded sound - Take the following steps to lower the volume or mute the sound while playing a tape on the Camcorder. Levels may be adjusted from anywhere between 00 to 19. You will not hear any sound when the volume is set on 00. If you close the LCD screen while playing, you will not hear sound from the speaker. [ Notes ] When the AV cable is connected to the Camcorder, you will not hear sound from the Built-In Speaker and cannot adjust the volume. The sound will return when you remove the connected AV cable from the jack of your Camcorder. It is easier to view a tape using the LCD screen as opposed to the viewfinder When in a moving automobile or outdoors. To play back a tape, the television must be NTSC compatible. (see page 113) We recommend that you use the AC Power adapter as the power source for Connect the Camcorder to your TV with the Multi-AV (left)-White TV cable. The white jack: Audio(L)-mono La clavija amarilla: Video The red jack: Audio(R) La clavija blanca: Audio(L)-mono If you connect to a monaural TV, connect the La clavija roja: Audio(R) Si se trata de un yellow jack (Video) to the video input of the TV televisor monoaural, conecte la clavija amarilla and the white jack (Audio L) to the audio input (vídeo) a la entrada de vídeo del televisor y la Audio/Video/ S-Video of the TV. [ Notes ] You may use the S-Video connector on the cable to obtain better quality [ Notas ] pictures if you have an S-Video jack on your TV. [. . . ] open the cassette compartment and remove the battery. Leave the Camcorder in a dry, warm room for at least two hours. Release the write protect tab on the Memory Card. Eject and re-insert the memory card Try another Memory Card Pantalla No Memory Card ! [. . . ]