User manual SAMSUNG SCL-W3755

[. . . ] Keep the product away from direct light, and do not leave it in a place with high humidity for a long period. If the product is transferred from a cold to a warm and humid environment, condensation may form on the lens or within the device. For such occurrences, turn the camera off for approximately 1 hour and then use it normally. [. . . ] Attach the WIDE or TELE Conversion Lens onto the adaptor by rotating to the right. Precautions For the Mounting Of the Lens Adaptor And Conversion Lens Properly engage the screw threads by rotating slightly when screw-mounting the Lens Adaptor or the Conversion Lens. Do not apply too much force to fasten the devices together. Improperly engaged screw threads may damage the thread ridges and/or cause blurred photographs. Also, applying too much force to fasten the devices may damage the camera or cause difficulties in removing the lens or lens adaptor. The company will not bear any responsibility relating to problems that occurred due to user carelessness in connecting the devices. Therefore, please carefully read the precautions in the User Manual thoroughly before using the product. [Lens Ring] [Lens Adaptor] Do not use flash units with the Conversion Lens mounted since the lens blocks the lighting control sensor and causes an incorrect exposure level. The distance displayed on the LCD is different from the actual distance when using the Manual Focusing Mode with the Conversion Lens mounted. Use in automatic focusing mode only when using with the Conversion Lens. A picture may be out of focus when used in manual focusing mode, scene mode, or night-scene mode. Using the WIDE function to zoom with the TELE Conversion Lens mounted may cause a darkening effect at the borders or decreased resolution. In such cases, adjust zoom until these effects disappear. SCL-T3755 : Please shoot in TELE mode SCL-W3755 : Please shoot in WIDE mode Mounting of a MC (Multi Coating) protector or filter onto the WIDE Conversion Lens may cause a darkening effect at the borders. Adjust the zoom until the effect disappears. Do not apply sudden or excessive force to the lens when the Conversion Lens is mounted. Such actions may damage the lensconnecting part, or damage the camera, or cause blurred photographs. [Conversion Lens] Conversion Lens(SCL-T3755/W3755) Maintenance Clean the Conversion Lens and the Lens Adaptor with a blower brush first and then use a fine cloth to gently remove dust. [. . . ] Then, turn it to the right so that the screw threads get engaged properly. At this point you should be able to easily screw on the Lens Adaptor. Usage Precautions For Conversion Lens (SCL-T3755/W3755) Make sure to tightly fix the Conversion Lens when mounting it onto the Lens Adaptor. (However, applying too much force may cause difficulties when removing the lens) Use the LCD monitor instead of the viewfinder when using with the Conversion Lens since the subject being photographed will be partially blocked by the Conversion Lens when viewed through the viewfinder. Use the camera's built-in self-timer function instead of the remote control when using with the Conversion Lens since the lens may block the remote control receiving port and the remote control may not function properly. [. . . ]