User manual SAMSUNG SC-L907

[. . . ] ENGLISH Video Camcorder 8mm COLOR LCD SCL901/L906/L907 ST ST ART/ OP SE TIM LF ER DIS PL AY CO U RES NTE ET R WID E ST ILL ZE RET R URO N Hi TE LE SCL901/L906/L907 Owner's Instruction Book Before operating the unit, please read this instruction book thoroughly, and retain it for future reference. ELECTRONICS US PATENT 4415844 ENGLISH Notices and Safety Instructions Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of fire or electric shock. This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying this product. To prevent electric shock, match wide blade of plug to wide slot and fully insert. READ INSTRUCTIONS: All the safety and operating instructions should be read before the CAMCORDER is operated. [. . . ] However, the Date/Time will only be seen if it has been previously set. (DIS ( ) will be displayed on SCL906/L907 only) 3. Press the START/STOP button to start recording. s Recording will begin using the basic automatic environment settings. 4 Pressing the EASY button again turns the EASY mode off. s The camera will return to the settings that were set prior to the EASY mode being switched on. Notes: s In the EASY mode, the MENU, MF, DSE, P. AE and BLC functions are not available. s If you want to use these functions, you must first switch the EASY mode off. s The EASY mode settings are stored in the camera (provided a good lithium battery has been installed). STBY X:XX:XX EASY JAN. 31, 2004 33 ENGLISH Advanced Recording CUSTOM - Creating your own customized recording settings You can customize the settings and save them for future use. s The CUSTOM function only operates in CAMERA mode. Press the MENU ON/OFF button, to bring up the MENU list. Turn the UP/DOWN dial until CUSTOM SET is highlighted. Press the ENTER button, the CUSTOM menu will appear. s Set the status of each item to what you want. To exit the menu, press the MENU ON/OFF button twice. By pressing the CUSTOM button, the custom settings will come up. s Date/Time and Title will only appear if these have been set in advance. s The word "CUSTOM" will be displayed on the LCD at the same time. Example: When the CUSTOM SET is set as follows; 7. Press the START/STOP button to start recording. s Recording will begin using the new CUSTOM settings. [. . . ] In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly. To prevent possible damage under these circumstances, the camcorder has a built-in moisture sensor. If there is moisture inside the camcorder, "DEW( )" is displayed. If this happens, none of the functions except cassette ejection will work. [. . . ]