User manual SAMSUNG SCX-3205W

[. . . ] All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user's guide. IPad, iPhone, iPod touch, TrueType, Mac and Mac OS are trademarks of Apple Inc. All other brand or product names are trademarks of their respective companies or organizations. [. . . ] Do not use a paper with more than 6 mm (0. If you do not adjust the paper width guides, it may cause paper jams. Open the front door, pinch the paper length guide and pull it out to extend the tray. Then, adjust the tray size to the media size you are loading (See "Changing the tray size" on page 49). Flex or fan the edge of the paper stack to separate the pages before loading papers. Place the paper with the side you want to print facing up. When printing on special media, you must follow the loading guideline (See "Printing on special media" on page 51). â· When paper does not feed well while printing, gently push the paper in manually until it starts feeding automatically. Squeeze the tray paper width guides and adjust them to the width of the paper. Do not force them too much, or the paper will bend resulting in a paper jam or skew. For example, if you want to use a label, set the paper type to Label. When you print a document, set the paper type and size for the tray. For information about setting the paper type and size on the control panel (See "Setting the default tray and paper" on page 46). Select Manual Feeder in paper source, then press OK. If you are printing multiple pages, load the next sheet after the first page prints out, and press Start button. Repeat this step for every page to be printed. Archive: 70 to 90 g/m2 (19 to 24 lbs bond) If you need to keep the print-out for a long time, such as for archives. The table below shows the available special media for printing. When printing on a special media, we recommend you feed one paper at a time. To print on an envelope, the stamp area should be on the left side and the end of the envelope with the stamp area should enter the printer first in the center of the tray. (: supported, Blank: Not supported) The following media types are shown in the Printing Preferences. This paper type option allows you to set the type of paper to be loaded in the tray. [. . . ] A program used to send commands and transfer data from the computer to the printer. All wireless devices in a WLAN use the same SSID in order to communicate with each other. The subnet mask is used in conjunction with the network address to determine which part of the address is the network address and which part is the host address. A watermark is a recognizable image or pattern in paper that appears lighter when viewed by transmitted light. [. . . ]