User manual SAMSUNG SCX-5115

[. . . ] SCX-5315F/5115 Digital Laser MFP SCX-5315F SCX-5115 User's Guide Home Visit us at: www. samsungprinter. com JC68-01054ARev. 1. 00 This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any changes, direct or indirect, arising from or related to use of this manual. [. . . ] The current setting appears on the bottom line of the display. 2 Select "CASSETTE" or "BYPASS" by pressing Paper Tray repeatedly or using the navigation buttons, and press Mode/Enter (Enter on SCX-5115) to save the selection. 3 If you selected "BYPASS" at the step 2, the display prompts you to select the PAPER TYPE for the Multi-Purpose Tray. Use the navigation buttons to select the paper type you are using in the Multi-Purpose Tray. 4 Press Mode/Enter (Enter on SCX-5115) to save the selection. 4. 2 COPYING Making Copies from the Automatic Document Feeder Using the ADF (Automatic Document Feeder), you can load up to 30 documents (20lb, 75 g/m2) in one job. Ensure that documents are in good condition, that they have the same thickness and weight, and that all of the staples and paper clips have been removed. 1 Feed the documents (up to 30 pages) face up into the ADF and adjust the document guides to the document size. Make sure that the bottom of the document stack matches the paper size marked on the ADF. 4 Document guides 2 SCX-5315F users should verify that the machine is in the Copy mode. If necessary, press Mode/Enter to change the mode to Copy mode. In Copy mode, the LCD display shows: Copy size Number of copies Note that you cannot make copies in Fax mode. The machine will sounds an error beep. 3 Make sure that you have selected the required paper tray. See page 4. 2. 4 Customise the copy settings including the number of copies, copy size, contrast and image type using the control panel buttons. See "Setting Copy Options" on page 4. 6. To clear the settings, use the Stop/Clear button. 5 If necessary, you can use special copy features, such as collation and duplex copying. COPYING 4. 3 6 Press Copy/Start to begin copying. NOTE: Dust on the ADF glass may cause black lines on the printout, so always keep it clean. Making Copies using the Document Glass If you want to make copies from booklet, pamphlet, transparencies, or documents having other unusual characteristics, use the document glass to load documents. 1 Lift the document cover. 2 Place the document face down on the glass and align it with document guides on the left top corner of the document glass. 4. 4 COPYING NOTE: Make sure that no other documents are in the ADF. If a document is detected in the ADF, this document has the priority rather than the document on the scan glass. 3 Close the scanner cover. NOTES: · Leaving the cover open while copying will affect the copy quality and toner consumption. · If you are copying a page from a book or magazine, close the cover flat. The slanted cover may cause heavy exposure of the light when scanning. 4 SCX-5315F users should verify that the machine is in the Copy mode. If necessary, press Mode/Enter to change the mode to Copy mode. In Copy mode, the LCD display shows: Copy size Number of copies 4 Note that you cannot make copies in Fax mode. The machine will sounds an error beep. 5 Make sure that you have selected the required paper tray. See page 4. 2. 6 Customise the copy settings including the number of copies, copy size, contrast and image type using the control panel buttons. See "Setting Copy Options" on page 4. 6. To clear the settings, use the Stop/Clear button. 7 If necessary, you can use special copy features, such as Auto Fit and Clone. 8 Press Copy/Start to begin copying. NOTES: · You can cancel a copy job while it is copying by Press the Stop/ Clear button. · Dust on the document scanner glass may cause black spots on the printout, so always keep it clean. COPYING 4. 5 Setting Copy Options The following buttons on the control panel let you set all the basic copy options; contrast, image type, number of copies and copy size. When making a copy, use these buttons before pressing Copy/Start. Image The Image setting is used to improve the copy quality. [. . . ] Press or to select "YES" and press Mode/Enter (Enter for SCX-5115). To cancel restoring, select "NO. " 6 To return to Standby mode, press Stop/Clear. Resetting the Network Interface Card When your network interface card does not work properly, you need to reboot the card. A 1 Press Menu/Exit and then System Setup on the onetouch dial keypad. SCX-5115 users should press Menu and then Enter. 2 3 4 Press or to display "NETWORK SETUP" on the top line. Press Mode/Enter (Enter for SCX-5115) when "RESET NETWORK" displays on the bottom line. Press or to select "YES" and press Mode/Enter (Enter for SCX-5115). [. . . ]