User manual SAMSUNG SD-612S

[. . . ] Emergency eject hole (if the compartment does not open when you press the Eject button, power off the computer, insert a pin or unfolded paper clip in the hole and push firmly) 6. Eject button Installing the DVD-ROM Drive To install your DVD-ROM drive in the PC, proceed as follows. 1 Make sure that the PC is powered off and disconnected from any power source. 2 If necessary, attach a horizontal bracket to both sides of the drive. q 1 2 3 4 5 Use of the brackets depends on your computer model; you can purchase these accessories separately from your computer dealer. 1. [. . . ] If you have installed the appropriate player, such as Microsoft Windows Media Player, you can adjust the volume using the headphone volume control on the drive front panel. Playing Video CDs Set up and run the SOFT MPEG program. Storing and Cleaning Your Discs DVD Region Protection Coding (RPC): The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). Currently, the motion picture industry has divided the world into different regions or zones that correspond to the regional markets into which the motion picture industry releases movies. Simply put, RPC codes are placed on movies marketed throughout the world, based on the region of the world in which they are being sold. These RPC codes help control and prevent pirating of new movies into other motion picture regions prior to their true release dates within those markets. The SD-610/612 DVD-ROM drive supports RPC phase II. In the RPC-2 mode, the local code can be changed by users. RPC-2 is selected by default for the SD-610/612 DVD-ROM drive. You can change the region code up to five times via an MPEG application. Please contact your dealer or local SAMSUNG representative if you wish to change the local code more than five times. To ensure a long service life for your discs and drive, follow the precautions below when storing and cleaning your discs. 1 Do not place a disc in direct sunlight. 2 Store a disc vertically in a well-ventilated and stable location. 3 Do not write or attach a label on a disc. 4 Do not drop a disc or place heavy objects on it. 5 Do not touch the surface of a disc; hold it by the edges. 6 To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth. 7 Do not leave the disc compartment open when you are not using it. 6 7 Solving Technical Problems Technical Specifications SAMSUNG continually strives to improve its products. Both the design specifications and these user instructions are thus subject to change without notice. Problem The DVD-ROM drive is not detected by the computer. After installing the DVD-ROM drive, the PC gets slower. Meaning / Solution x Check that the power, audio and IDE cables are correctly connected to the computer. [. . . ] Horizontal/Vertical x Adjust the size of the replay screen. When the MPEG software plays a Video CD, the pictures are not regux After checking the display resolution, adjust it, if neclar and the running speed is too slow. The Disc is not in message is displayed even though a disc has been inserted. [. . . ]