User manual SAMSUNG HT-D4600

[. . . ] HT-D4600 5. 1CH Blu-rayTM Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register HT-D4600_XY_0712. indd 1 2011-07-12 11:23:17 Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous CAUTION : TO PREVENT ELECTRIC voltage" inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT. This symbol indicates important instructions accompanying the product. LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 WARNING · To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO CAUTION · Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] If this is the first time you are using the function, it will ask you to allow or deny remote control of the product. Follow the instructions that came with the application to control the product. NOTE Setup Your product must be connected to the Internet to use the By Internet function. The upgrade is complete when the product turns off, and then turns on again by itself. Never turn the product off or back on Support manually during the update process. Software Upgrade The Software Upgrade menu allows you to upgrade the product's software for performance improvements or additional services. You can upgrade in four ways: · · · · By Internet By USB By Disc Via download (File) Samsung Electronics shall take no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade. If you want to cancel the upgrade while the upgrade software is downloading, press the ENTER button. By USB To upgrade by USB, follow these steps: 1. Download the latest USB software upgrade zip archive to your computer. You should have a single folder with the same name as the zip file. Make sure the disc tray is empty, and then insert the USB flash drive into the USB port of the product. In the product's menu, go to Settings > Support > Software Upgrade. Select By USB. The four methods are explained below. By Internet To upgrade by Internet, follow these steps: 1. Select By Internet, and then press the ENTER button. The Connecting to Server message appears. If there is a download available, the Download pop-up appears with a progress bar and the download starts. When the download is complete, the Upgrade Query window appears with three choices: Upgrade Now, Upgrade Later, or Don't Upgrade. If you select Upgrade Now, the product upgrades the software, turns off, and then turns on automatically. If you do not make a selection in one minute or select Upgrade Later, the product stores the new upgrade software. You can upgrade the software later using the Via download function. If you select Don't Upgrade, the product cancels the upgrade. NOTE The disc tray must be empty when you upgrade the software using the USB Host jack. When the software upgrade is done, check the software details in the software Upgrade menu. Do not turn off the product during the software upgrade. It may cause the product to malfunction. Software upgrades using the USB Host jack must be performed with a USB memory flash stick only. English HT-D4600_XY_0712. indd 39 39 11:24:21 2011-07-12 Setup By Disc To upgrade by Disc, follow these steps: 1. Download the latest disc software upgrade zip archive to your computer. You should have a single folder with the same name as the zip file. Finalise the disc before you remove it from your computer. In the product's menu, go to Settings > Support > Software upgrade. Select By Disc. NOTE When the system upgrade is done, check the software details in the software Upgrade menu. Do not turn off the product during the software Upgrade. [. . . ] · Check if the network is stable. · Check if the network cable is properly connected and if the network is not overloaded. · Wireless connection between the server and the product is unstable. · IP address under the same subnetwork should be unique, otherwise IP collision can results in such a phenomenon. [. . . ]