User manual SAMSUNG HT-D555W

[. . . ] HT-D555W Digital Home Entertainment System user manual Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO This symbol indicates important instructions accompanying the product. LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 WARNING ~ To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION ~ Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. ~ The Mains plug is used as a disconnect device and shall stay readily operable at any time. [. . . ] ~ NTSC : You can select the NTSC video format ~ PAL : You can select the PAL video format ~ On : The original resolution of the DVD disc will be output to the TV direct. ~ Off : The output resolution will be fixed according to the Resolution previously set, regardless of the resolution of the disc. English 03 Setup Adjusting Front/Surround Bal. ` The volume decreases as you move closer to ­6. Adjusting Center/Surround/Subwoofer Level ` The volume level can be adjusted in steps from +6dB to ­6dB. ` The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Audio Speaker Setting Speaker Size You can set the Speaker Size of the Center and Surround Speakers, as well as Test Tone in this mode. Settings Speaker Setting Speaker Size Sound Edit Delay Time Test Tone : Off Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Center and Surround speakers. You can also set the Test Tone in this mode. mMove " Select ' Return " Select ' Return Setting up the Speaker Delay Time When 5. 1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Surround Speakers. Settings Delay Time Front Center Surround Subwoofer Test Tone : Off : 00mSEC : 10mSEC ~ For the Front, the mode is set to Small. ~ For the Subwoofer, the mode is set to Present. ~ For the Center and Surround, you can switch the mode to Small or None. - Small : Select this when using the speakers. - None : Select this when no speaker is connected. NOTE ` The speaker mode may vary depending on the Dolby Pro Logic and Stereo settings. Sound Edit You can adjust the balance and level for each speaker. Settings Front Bal. Center Level Surround Level SW Level <Change " Select ' Return mMove " Select ' Return Sound Edit dB L dB L R R dB dB dB dB dB NOTE ` ` The Delay Time menu will be activated only when a 5. 1 channel source is played. You can not set Center and Surround in this mode when their Speaker Size is set to NONE. <Change " Select ' Return mMove " Select ' Return Press the buttons to select and adjust the desired speaker. Press the _+ buttons to adjust the settings. English Setup Ideal Center Speaker placement Test Tone Settings Speaker Setting Speaker Size Sound Edit Delay Time Test Tone : On Ideal Surround Speaker placement Place all speakers within this circle. Df: The distance from Front Speaker Dc: The distance from Center Speaker Ds: The distance from Surround Speaker mMove " Select ' Return " Select ' Return Use the Test Tone feature to check the speaker connections. ~ The test tone will be sent to Front Left Center Front Right Surround Right Surround Left Subwoofer in order. To stop the test tone, press the ENTER button. Setting the Center Speaker If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between 0. 00m 0. 34m 0. 68m 1. 06m 1. 40m 1. 76m Df and Dc Delay Time 00 ms 01 ms 02 ms 03 ms 04 ms 05 ms ASC (Auto Sound Calibration) Setting By setting the Auto Sound Calibration(ASC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5. 1-channel sound field optimized for your environment. Setting the Surround Speaker If the distance of Dc is equal to or longer than the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between 0. 00m 1. 06m 2. 11m 3. 16m 3. 62m 5. 29m Ds and Dc Delay Time 00 ms 03 ms 06 ms 09 ms 12 ms 15 ms ASC IN/ AUX IN 1 1/ AUX IN ASC IN ASC Microphone NOTE ` ` ` With PL II (Dolby Pro Logic II), the delay time may be different for each mode. With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. The Center channel is only adjustable on 5. 1 channel discs. L: Front Left R: Front Right C: Center SW: Subwoofer SL: Surround Left SR: Surround Right English 03 NOTE ` ` ` ` ` ` ` ` ` ` ASC setup can be made when there is no disc in the product. [. . . ] · Are you using a disc that does not contain menus? Playback does not start immediately when the Play/Pause button is pressed. Sound is not produced. Sound can be heard only from a few speakers and not all 6. Dolby Digital 5. 1 CH Surround Sound is not produced. The remote control does not work. · Disc is rotating but no picture is produced. · Picture quality is poor and picture is shaking. [. . . ]