User manual SAMSUNG XE700T1A-A01 APPLICATION GUIDE

[. . . ] Towakethecomputerup, brieflypressthePowerbuttonofthe computeragain. Using the Touch Logon Using the Touch Logon program, you can easily log on using your fingers. Getting Started 8 Configuring the Touch Logon program To use the Touch Logon function, you have to setup the Touch Logon function in the Windows Logon screen. 3 Choose the Touch Logon background screen. Select a background screen by touching it and touch Next. 1 2 Click Start > All Programs > Samsung > Touch Logon > Touch Logon Options. Select Use Touch Logon. z x If you haven't set a Windows password, the Touch Logon settings are finished at this stage. [. . . ] This is the same as leftclicking once with a mouse. Double-tap (double-click) To run an item, quickly tap the item twice with your finger. This is the same as double-clicking once. Moving (drag) To drag an item, place your finger over the item and drag it to the new location. This is the same as dragging using a mouse. Press and take off (mouse right-click) Tapping two fingers in succession (mouse right-click) Moving finger (scroll) If you press and hold the screen for approximately 3 seconds, the pop-up menu appears. This is the same as right-clicking with the mouse. Tap with one finger and then tap with another finger while holding down the first finger. This is equivalent to right-clicking a mouse. Move your finger up and down, left or right to move on the screen accordingly. This is the scroll function of the mouse. This operation may perform a different function depending on the application program. Using the Applied Gestures Touch Operation Drag two fingers apart / together (zoom-in/zoom-out) Flick one finger fast (page move) Function Using the Touch Feature 17 Drag apart or together two fingers to zoom-in or -out of a picture or image. Flick one finger quickly to the left or right in order to move to the previous or next page. By quickly drawing a line from top to bottom with two fingers, the Touch Launcher program is launched. Quickly draw with two fingers (this runs the Touch Launcher) Tapping three fingers (Launching the Touch Supporter) Tapping five fingers (Launching the keyboard program) Learning about touch operations Tapping three fingers simultaneously launches the touch supporter program. Tapping fi ve fingers simultaneously launches the keyboard program. Select Start > Control Panel > Hardware and Sound > Pen and Touch > Flicks tab and select Practice using flicks to learn about the various touch operations. Screen Calibration Using the Touch Feature 18 When you use the touch screen for the fi rst time or the pointer on the screen does not precisely match the points you touch, calibrate the touch screen using the Tablet PC Settings menu. Screen Calibration The calibration process for the touch screen may differ depending on the operating system and may not be available in some operating systems. The following descriptions assume the Windows 7 operating system. 2 Select the screen type to calibrate. If the Calibration screen appears, touch the point represented by the "+" mark and then remove your finger. The "+" mark appears sequentially from the top left to the bottom right of the screen. 1 Click Start > Control Panel > Hardware and Sound > Tablet PC Settings > Display > Calibrate. 3 When the Do you want to save the calibration data?The touch screen input points are calibrated. Entering Letters Using the Touch Screen You can enter letters using either the Tablet PC input panel. Using the Touch Feature 19 Launching the Tablet PC Input Panel If you touch the touch screen with your finger, the Tablet PC Input Panel appears with the cursor at the bottom left on the Desktop. tab If you touch the Tablet PC Input Panel tab, the Tablet PC Input Panel appears. Let's learn how to enter letters in Notepad. 1 2 3 Launching Notepad. If you touch the Notepad screen with your finger, the appears on the Notepad with the cursor. If you touch the Panel appears. Writing Pad Mode Touch keyboard Tools Close Are you unable to find the Tablet PC Input Panel tab ?click start > Control Panel > Hardware and Sound > Tablet PC Settings > Other tab and select [Go to Input Panel Settings], select the "Use the Input Panel tab" in the Options window and then click OK. with your finger, the Tablet PC Input Entering Letters Using the Touch Screen Entering Letters Using the Touch Screen Using the touch keyboard, you can enter letters by touching the corresponding keys on the keyboard that is displayed on the screen as you do with a normal keyboard. Using the Touch Feature 20 Entering letters with the writing pad (hand-writing input mode) In the touch screen, you can enter letters by directly writing letters with your finger on the writing pad input panel. 1 2 In the Tablet PC input panel, touch the touch keyboard icon . To edit program icons Using the Touch Feature 23 2 If the program icon changes to Edit mode the new location. , move the icon to 1 Touch the Edit mode icon. 3 To exit Edit mode, touch the Edit mode icon again. Using the Touch Supporter This program helps you to use functions that cannot be easily used with touch operations more easily. Using the Touch Feature 24 Using the Touch Supporter If you touch the screen with three fingers simultaneously the touch support program is launched. Ctrl Ctrl+X Del Magnifier Settings Using the Numeric Keypad The Numeric Keypad is to use numeric and direction keys only. 1 2 Touch the Numeric Keypad on the screen. . [. . . ] (Alternatively, click the Control Panel > Hardware and Sound > Sound > Playback tab. ) 1 2 DC Jack Wired LAN Port Digital Video/ Audio Port (HDMI) A jack to connect the AC adapter that supplies power to the computer. Connect the Ethernet cable to this port. You can connect an HDMI cable to this port. [. . . ]